ADEMCO LYNX Manual do utilizador - Página 14

Procurar online ou descarregar pdf Manual do utilizador para Sistema de segurança ADEMCO LYNX. ADEMCO LYNX 17 páginas.
Também para ADEMCO LYNX: Manual de início rápido (8 páginas), Manual do sistema (14 páginas)

Imprimir página

POWERLINE CARRIER DEVICES WORKSHEET FOR * 80, and * 81.

Applicable only if Powerline Carrier Devices are to be used, or chime-by-zone feature is used.

80 OUTPUT DEVICES

Fill in the required data on the worksheet on below and follow the programming procedure in the Installation Instructions as

you enter the data during the displays and prompts that appear in sequence.

Note:

Field 25 must be programmed with a House Code.

DEVICE

ACTION

NUMBER

(aa)

P.L.C.D.*

SYSTEM

P.L.C.D.*

SYSTEM

P.L.C.D.*

P.L.C.D. = Powerline Carrier Device (X-10).

Where:

A = DEVICE ACTION

ET = EVENT TYPE

Z L = ZONE LIST 1, 2, or 3 (from Field 81) or 0 = Not Used.

ZT = ZONE TYPE/SYSTEM OPERATION Choices for Zone Types are:

00 = Not Used

01 = Entry/Exit#1

02 = Entry/Exit#2

03 = Perimeter

04 = Interior Follower

05 = Trouble Day/Alarm Night

Choices for System Operation are:

20 = Arming–Stay

21 = Arming–Away

22 = Disarming (Code + OFF)

31 = End of Exit Time

32 = Start of Entry Time

33 = Any Burglary Alarm

36 = *At Bell Timeout

Note: In normal operation mode:

For Devices 1-6:

Function + Lights On + N

Function + Lights Off + N

S T A R T

either or both

EVENT

ZONE

ZONE TYPE

TYPE

LIST

SYST OP'N

(et)

(zl)

(zt)

0 = No Response; 1 = Close for 2 sec; 2 = Close and stay closed; 3 = Pulse on and off.

0 = Not used; 1 = Alarm; 2 = Fault; 3 = Trouble.

"START" ZONE LIST: Upon alarm, fault, or trouble of ANY zone on this list, device action will START.

"STOP" RESTORE of ZONE LIST: Upon restore of ALL zones on this list, device action will STOP. It

NOTE: Do not assign zones with zone types 20, 21, or 22 to a zone list.

06 = 24 Hr Silent

07 = 24 Hr Audible

08 = 24 Hr Aux

09 = Fire Zone

10 = Interior w/Delay

24= Silent Burglary

38 = Chime

39 = Any Fire Alarm

40 = Bypassing

42 = System Battery Low

43 = Communication Failure

52 = Kissoff

58 = Duress

either or both

RESTORE

ZONE LIST

(zl)

need not be same list as used for START.

Note: Any zone in "ZT" going into alarm,

For Devices 7 and 8:

Code + Function + 4 + N

Code + Function + 7 + N

14 –

–

S T O P

ZONE TYPE

/SYST OP'N

(zt)

fault, or trouble will activate device.

Any zone of that type that restores

will stop device action.

* Or at Disarming, whichever occurs

earlier.

N = device (unit) number

(Entry starts Device N)

(Entry stops Device N)