dB Technologies SIGMA S218 Manual do utilizador de início rápido - Página 4
Procurar online ou descarregar pdf Manual do utilizador de início rápido para Subwoofer dB Technologies SIGMA S218. dB Technologies SIGMA S218 4 páginas. Active bass reflex subwoofer
Imprimir página
Technical Data
Speaker
Type:
Subwoofer Bass Reflex
Usable Bandwidth [-10
dB]:
Max SPL (1
m):
137 dB
LF: (2x)
18"
LF Voice
Coil:
4"
Crossover
frequency:
90 / 120 Hz
Amplifier
Amp
Technology:
Digipro G3
Amp
Class:
Class-D – Passive cooling (convection)
RMS
Power:
1800 W
Peak Power:
3600 W
Processor
Controller: 28/56 bit -
48 kHz
Limiter:
Peak, Thermal, RMS
Scan with your QR Reader
App to download the
complete User Manual
Download the complete user manual on:
EMI CLASSIFICATION
According to the standards EN 55103 this equipment is designed and suitable to operate in E5 Electromagnetic environments.
FCC CLASS A STATEMENT ACCORDING TO TITLE 47, PART 15, SUBPART B, §15.105
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
WARNING: Make sure that the loudspeaker is securely installed in a stable position to avoid any injuries or damages to persons or properties.
For safety reasons do not place one loudspeaker on top of another without proper fastening systems. Before hanging the loudspeaker check
all the components for damages, deformations, missing or damaged parts that may compromise safety during installation. If you use the
loudspeakers outdoor avoid spots exposed to bad weather conditions.
Contact dB Technologies for accessories to be used with speakers. dBTechnologies will not accept any responsibility for damages caused by
inappropriate accessories or additional devices.
Features, specification and appearance of products are subject to change without notice. dBTechnologies reserves the right to make changes or
improvements in design or manufacturing without assuming any obligation to change or improve products previously manufactured.
SIGMA S218
42 – 120 Hz
www.dbtechnologies.com/EN/Downloads.aspx
www.dbtechnologies.com
Operating voltage range:
110-120 V (50-60 Hz)
User interface
Controls:
Subwoofer level, Subwoofer setup (Delay,
Phase), Xover switch, Outputs Mode switch
Input / Output
Mains
connections:
Signal
Inputs: (2x) XLR balanced audio inputs
Signal
Outs:
(2x) XLR balanced audio outputs
USB (service):
mini USB B-type for firmware update
Mechanics
Housing:
Plywood
Grille:
CNC metal grille black painted
Handles: integrated, 2 for each side
Pole
Mount:
Yes, M20 screw
Width:
500 mm (16.69 in)
Height:
1210 mm (47.64 in)
Depth:
530 mm (20.87 in)
Weight:
59.8 kg (131.84 lbs.)
220-240 V (50-60Hz) /
PowerCON IN / LINK
Rev 1.0 cod. 420120258Q