ADEMCO TeleCommand Manual do utilizador - Página 4

Procurar online ou descarregar pdf Manual do utilizador para Unidade de controlo ADEMCO TeleCommand. ADEMCO TeleCommand 20 páginas. Telephone module

Operating Instructions

The instructions that follow describe how to obtain security system

status and access your security system using the telephone, either on

or off the premises, and describe how to perform security system

commands using the telephone.

explanation of the status report that will be heard immediately

following telephone access to the system, and other helpful

information

TeleCommand.

If you have difficulties with the operation of TeleCommand, refer to

the section entitled, "If You Have Difficulty With The Telephone

System."

Summary

When attempting to access TeleCommand from a telephone that is on

or off premises, you must press the [#] key and enter your assigned 4-

digit TeleCommand User Code; access to your security system occurs

only after correct entry of the required user code.

After accessing TeleCommand, an automatic security system status

report is provided. During this report, or immediately following it, you

can execute virtually any system command using the telephone

keypad, using the same key entries normally performed at a security

system keypad*. Voice confirmation of each successful command entry

is provided.

*The special key functions used on FBII OMNI and IntelliSense

controls

following key sequence on the telephone keypad:

•

STAY

•

BYPASS

•

INSTANT

Example: To arm an FBII/IntelliSense system to STAY INSTANT

mode, press [*] + [1] + [*] + [3] + [four digit user code]

regarding

the

(STAY, BYPASS, and INSTANT) are enabled by the

(* + 1)

(* + 2)

(* + 3)

Also provided is a detailed

various

operating

features