Dynamode 24 ports Giga managed switch Manual de instalação rápida - Página 4

Procurar online ou descarregar pdf Manual de instalação rápida para Interruptor Dynamode 24 ports Giga managed switch. Dynamode 24 ports Giga managed switch 7 páginas. Gigabit management switch

Imprimir página

3.1 Web-based management

The switch has a Web GUI interface for switch configuration. The Switch can be

configured through the Web browser. .A network administrator can manage, control,

and monitor the Switch from the local LAN. This section indicates how to configure

the Switch to enable its smart functions including:

System configuration: Overal configuaration, Ports configuration, Port VLAN,

802.1Q VLAN, 802.1Q VLAN advanced setting, Port trunking, MAC bonding, MAC

list management, Port mirror, QoS, Port filtering, Port width setting, Broadcasting

storm control

System status monitor: Port statical information

System maintenance: Restort to factory default settings, Firmware upgrade, system

file save and quit

Before you configure this device, note that when the Switch is configured through an

Ethernet connection, the manager PC must be set on the same the IP network. For

example,when the default network address of the default IP address of the Switch is

192.168.1.254,then the manager PC should be set at 192.168.2.x(where x is a number

between 1 and 256 except 254),and the default subnet mask is 255.255.255.0.

Open an Internet Explorer 5.0 or above Web browser.

Enter the IP address http://192.168.1.254 (the factory-default IP address setting)in the

address loaction.

NOTE:

192.168.1.254,

Sub-network

mask

The

factory-default

address:

255.255.255.0，Gateway 192.168.1.1

Through the Web Management Utility, you do need to remember the IP Address;

select the device shown in the Monitor List of the Web Management Utility to settle

the device on the browser.

When the following dialog page appears, enter the default user name and passport and

press Login to enter the main configuration window.

NOTE:

The factory-default User name is empty. Pass word is "admin "

Dynamode Ltd