Activision MFSM Manual do operador - Página 15

Procurar online ou descarregar pdf Manual do operador para Interruptor Activision MFSM. Activision MFSM 16 páginas. Multi-function switching matrix

MFSM Volume 1 -
Operator's Manual
CIA-M-22543/B
July 4, 1986
MFSM Volume 1 -
Operator's Manual
CIA-M-22543/B
July 4, 1986
To disable the bypass, do the following:
1. Select MFSM display showing the bypassed
camera
2. Press the BYP pushbutton to return to nonnal V1R
function.
WA!R{NIING
SOME SECURITY SYSTEMS CAN DETECT
WHEN A SYNCHRONIZATION
ERROR HAS OCCURRED. BE ABSOLUTELY
CERTAIN THAT THE CORRECT
TIME SYNCH SIGNAL IS PRESENT ON THE
BYPASS CHANNEL.
4.4.4 TGS and MRU Modes
When the Telemetry Guidance System screen is present on
any of the MFSM displays, all pertinent information
regarding active cameras, site personnel placement,
navigational infonnation, and MRU location is provided.
To display the TGS screen:
1. Select the desired display monitor on the MFSM.
2. Press the TGS pushbutton.
3. Verify that the monitor status display indicates
"TGS -
". The current direction of the MRU
is shown
in
the space after the dash.
Since location of an active MRU can also be shown relative
!o its
~urroundings, ~t
is best to control the MRU in conjunct-
Ion WIth the TGS display. Figure 4-1 explains the symbols
used on the TGS screen.
4.4.4.1 Controlling MRU Movement. To control an
MRU displayed on the TGS, perfonn the following
procedure:
1. On systems equipped with a joystick:
a) Move the hand cursor to the MRU pushbutton.
b) Press and release the joystick control button.
c) The MRU button is highlighted.
d) Move the column forward to move the MRU
forward, and back to move the MRU
backwards.
e) Move the column to the left to turn the MRU to
the left, and to the right to turn the MRU to the
right.
f) Note that the TGS status display indicates the
direction (EAST, WEST, NORm, or SOUill)
the MRU is facing.·.
g) Centering the control column stops the MRU in
its current position.
h) Press the MRU button again to release the MRU
function.
i) Verify that the MRU button is no longer
highlighted.
On systems equipped with a mouse:
a) Press and hold the F button to move the MRU
forward, and the B button to move the MRU
backwards.
b) Press and hold the L button to turn the MRU to
the left,
and the R button to turn the MRU to the right.
c) Note that the monitor status display indicates the
direction (EAST, WEST, NORm, or SOUill)
the MRU is facing.