909 LS15CS Manual de instruções - Página 13

Procurar online ou descarregar pdf Manual de instruções para Serra 909 LS15CS. 909 LS15CS 16 páginas. 15 amp dual laser circular saw with magnesium

Imprimir página

Maintenance

WARNING.

Always ensure that the tool is switched off and

the plug is removed from the power point before making any

adjustments or maintenance procedures.

Cleaning

1. Keep the tool's air vents unclogged and clean at all times.

2. Remove dust and dirt regularly. Cleaning is best done

with a rag.

3. Re-lubricate all moving parts at regular intervals.

4. If the body of the saw needs cleaning, wipe it with a soft

damp cloth. A mild detergent can be used but nothing like

alcohol, petrol or other cleaning agent.

5. Never use caustic agents to clean plastic parts.

Troubleshooting

Trouble

Problem

Saw will not start

Power cord not plugged in

Power fault, fuse or circuit breaker tripped Check the power supply

Cord damaged

Burned out switch

Faulty motor

Blade does not reach

Tool is overheating

full speed

Poor cutting

Blunt blade

Vibration or abnormal

Loose parts

noise

Blade vibrating

Moving parts excessively worn

CAUTION.

Do not use cleaning agents to clean the plastic

parts of the tool. A mild detergent on a damp cloth is

recommended. Water must never come into contact

with the tool.

General inspection

Regularly check that all the fixing screws are tight. They

may vibrate loose over time.

Power cord maintenance

If the supply cord needs replacing, the task must be carried

out by the manufacturer, the manufacturer's agent, or a

qualified electrical service repairer to avoid a safety hazard.

Suggested remedy

Ensure that the cord is connected to the power supply

Use qualified power tool service agent to repair or replace

the motor

Turn off the tool and let it cool down to room temperature.

Inspect and clean the ventilation slots

Replace or sharpen circular saw blade

Check to see that all knobs and levers are securely

tightened including bevel adjustment knob, depth locking

lever and parallel fence locking knob

Ensure that the blade nut is securely tightened

Use a qualified electrical service repairer to repair or replace