Autonics PSAN-L01CPH Series Manual - Página 8

Procurar online ou descarregar pdf Manual para Instrumentos de medição Autonics PSAN-L01CPH Series. Autonics PSAN-L01CPH Series 13 páginas. Small size, 1/2,000 resolution connector type digital pressure sensor
Também para Autonics PSAN-L01CPH Series: Manual (2 páginas)

Imprimir página
Autonics PSAN-L01CPH Series Manual
Window comparison output mode [ WIN
Press
Key
Press
Key for
set value will flash
3 sec in RUN mode.
in turn every 0.5 sec.
Press
to select
setting value.
※ Low value setting range : Min. display pressure ＜
※ High value setting range :
※ The minimum display unit for hysteresis is fixed to 1.
Hysteresis-Window comparison output mode [ HY-W
Press
Key
ST1 and previously
Press
Key for
set value will flash
3 sec in RUN mode.
in turn every 0.5 sec.
Press
to select ST1
setting value.
※ ST1 setting range : Min. display pressure ＜ ST1 ≤ Max. display pressure
※ HYS1 setting range : Min. display pressure ＜ HYS1 ≤ ST1
※ Low value setting range : Min. display pressure ＜
※ High value setting range : Low value + (3×Min. display range) ≤
※ In case HYS1 and ST1 have the same setting values, it will have the minimum display unit as a hysteresis.
Automatic sensitivity setting mode [ AUTO
Press
Key
Press
ST1 and previously
Press
Key for
set value will flash
3 sec in RUN mode.
in turn every 0.5 sec.
Press
to select ST1
setting value.
※ ST1 setting range : Min. display pressure ＜ST1 ≤ Max. display pressure - 1% of rated pressure
※ ST2 setting range : ST1 + 1% of rated pressure ＜ ST2 ≤ Max. display pressure
※ If certain detection level difference is not ensured, or setting conditions are not met, ERR3 message will flash three times and returned
to ST2 setting mode. Check all setting conditions and set proper setting values.
※ Press
key to change set values and last set value will be saved for level 1 and level 2.
WIN ]
Press
Press
Key
and previously
and previously
set value will flash
in turn every 0.5 sec.
or
Key
Press
or
Key
to select
setting value.
,
≤ Max. display pressure - (3×Min. display range)
,
+ (3×Min. display range) ≤
Press
Press
Key
HYS1 and previously
set value will flash
in turn every 0.5 sec.
or
Key
Press
or
Key
to select
setting value.
≤ Max. display pressure - (3×Min. display range)
AUTO ]
Press
Press
Key
Press
Key
Key
ST2 and previously
set value will flash
in turn every 0.5 sec.
or
Key
Press
or
Key
to select ST2
setting value.
Pressure Sensor
Press
Key
Key
and previously
set value will flash
in turn every 0.5 sec.
Press
or
Key
Press
to select
to select
setting value.
setting value.
,
≤ Max. display pressure
HY-W ]
Press
Key
Key
and previously
set value will flash
in turn every 0.5 sec.
Press
or
Key
Press
to select
to select
setting value.
setting value.
≤ Max. display pressure
Press
Key
Key
RUN mode
Press
Key
SETand previously
set value will flash
in turn every 0.5 sec.
Sensitivity will be automatically SET.
Press
value between ST1 and ST2.
SET =
Press
or
Key
to select SET
setting value.
Press
Key
RUN mode
and previously
set value will flash
in turn every 0.5 sec.
or
Key
Press
Key
RUN mode
and previously
set value will flash
in turn every 0.5 sec.
or
Key
or
key to fine-adjust the setting
ST1
+
ST2
2
E-11
(A)
Photo
electric
sensor
(B)
Fiber
optic
sensor
(C)
Door/Area
sensor
(D)
Proximity
sensor
(E)
Pressure
sensor
(F)
Rotary
encoder
(G)
Connector/
Socket
(H)
Temp.
controller
(I)
SSR/
Power
controller
(J)
Counter
(K)
Timer
(L)
Panel
meter
(M)
Tacho/
Speed/ Pulse
meter
(N)
Display
unit
(O)
Sensor
controller
(P)
Switching
power
supply
(Q)
Stepping
motor&
Driver&Controller
(R)
Graphic/
Logic
panel
(S)
Field
network
device
(T)
Software
(U)
Other