Autonomous SmartDesk Core Duo Instruções de montagem - Página 2
Procurar online ou descarregar pdf Instruções de montagem para Mobiliário de interior Autonomous SmartDesk Core Duo. Autonomous SmartDesk Core Duo 3 páginas.
Imprimir página
3a. Attach Power Tray (C) to Support Beams (I) using 8 x (X) Screws and the 5mm Allen Wrench.
4. Attach 1 x Cable Trays (L) to each Support Beam (I) using 4 x Screws (M) with a Z2 and Z1
Gasket on each screw, as shown. Do not fully tighten screws.
M
5a. Flip the frame upright. Place the Power Beam Covers on Power Tray.
5b. Attach 4 x Screen Clips (E) to each
Connection Beam using 8 x Screws (X) and
5mm Allen Wrench.
3b. Attach Plastic Lids (J) to both
Connection Beams (I)
6a. Attach 2 x Brackets (D) to each Support Beam (I) using 4 x Screws (W) and 4mm Allen Wrench.
7a. Connect the Control Box (F) to corresponding
Control Switch (H), and Legs cable. Repeat process
with the Desk on other side.
8a. Carefully place both Desk Tops (G)
onto the desk frame. Attach Tops using 4
x (Y) Screws for each Bracket (D).
8b. Fix each central Support Beam (I)
into place using 2 x (Y) Screws.
6b. Place 4 x Support Pads (Z) on each
Bracket (D) and 2 x Support Pads (Z) on
each Support Beam (I) as shown.
7b. Plug the Power Cable (K) into Control Box (F)
and then into a power outlet. Repeat process with
the Desk on other side.