AGS Merlin FAM 1 Manual de instalação e operação - Página 6
Procurar online ou descarregar pdf Manual de instalação e operação para Controlador AGS Merlin FAM 1. AGS Merlin FAM 1 8 páginas. Gas service manual reset controller
Imprimir página
FAM1
Operation
System On & Off
When the control panel is powered, the [POWER] LED will illuminate.
Turn the key switch on, the [Gas On] LED will illuminate green. To turn the utility off, turn the key switch off.
Emergency Shut Off
The emergency shut off button is located on the front of the panel.
There is also a facility for remote shut off buttons to be wired in series on the circuit board – see [EM
REMOTE].
The emergency shut off button(s) will cut off the gas supply when activated.
To reinstate the system, the emergency shut off button(s) will need to be reset and the panel restarted.
LED Status
•
Power
When the system is connected to the mains supply, the Power LED will illuminate.
•
Gas On
When the key switch is OFF or an emergency shut off has been pressed, the GAS ON LED will be OFF.
GREEN = Gas ON
OFF = Gas OFF
•
Fire Alarm Lockout/EM Stop
If an emergency shut off button (either remote or on the panel) is pressed or the fire alarm panel has been
activated, the LED will illuminate AMBER and the gas supply will be turned off. The EM Stop button must
be re-set before restarting the system.
Maintenance
Keep your device in good working order - follow these basic principles.
Remove any dust/debris from the outer enclosure regularly using a slightly damp cloth.
•
Never use detergents or solvents to clean your device.
•
Never spray air fresheners, hair spray, paint or other aerosols near the device.
•
Never paint the device. Paint will seal vents and interfere with the device.
•
Rev: 01
04-23
Installation & Operation Manual
6