Airflow CE150DTP Instruções de instalação - Página 2

Procurar online ou descarregar pdf Instruções de instalação para Ventilador Airflow CE150DTP. Airflow CE150DTP 4 páginas. Ducted fan kit

CE100D and CE150DTP

Installation Instructions

Important:

For optimum efﬁ ciency, position the fan unit as close as possible to the outlet.

1. Select positions for inlet and outlet grilles. These should be clear of all

obstructions and no more than three metres apart. Additionally, the outlet should

be positioned away from windows and doors.

2. Using template on opposite page, cut an opening for both inlet and outlet.

3. Drill 3.6mm holes through required corner ﬁ xing points of inlet and outlet grilles.

4. Place three duct clips 120° apart on collars of both inlet and outlet grilles as well

as on each end of the fan body. (See ﬁ gures 1, 2 and 3.)

Fig. 1 - Outlet

5. Attach duct securely over outlet collar, push back into the roof space and secure

outlet with appropriate ﬁ xings for mounting surface. If using screws supplied,

ensure white screw cap arrangements are used to cover screw holes.

6. Select a site for the fan unit as close as possible to the outlet on a stable platform

such as a beam or post. (A saddle may be needed).

7. Make the electrical connections to the fan unit and attach the shortest possible

length of duct from the outlet collar to the fan, making sure that air ﬂ ow is in the

correct direction. Air ﬂ ow direction is from the motor towards the fan blades. (You

may choose not to have any ducting at all between the fan and outlet by inserting

the fan directly into the outlet collar and securing it with duct tape).

8. Keeping as straight a line as possible between the inlet and outlet points, fully

extend duct to minimise restriction of air ﬂ ow and cut the duct to ﬁ t to the fan unit.

Attach duct securely to fan unit and attach the other end of the remaining duct to

the collar of the inlet grille, making sure to secure the duct by passing it over the

duct clips.

9. Push inlet grille into the opening and screw ﬁ x it in the upward position with

screws and anka plugs supplied, and ensure the supplied white screw cap

arrangements are used to cover screw heads.

It is illegal for persons other than licensed electricians, or persons authorised

by legislation, to work on the ﬁ xed wiring of any electrical device.

Fig. 2 - Inlet

Ducted Fan Kit Installation Instructions / Warranty

Air ﬂ ow

direction

Fig. 3 - Fan Unit

Cable entry

to motor