The Mute button light turns off.
o
The call is unmuted and the other person can hear you again.
o
To redial a number:
1. From the Phone screen, press the Redial button.
Note: The last number will be redialed or you will see a list of the most recent numbers that you have dialed, from
which you can select one to redial.
2. If you see a list of numbers, select the number you want to redial.
3. Press the OK button or the Call softkey.
To activate extension to cellular (EC500):
1. Press the EC500 feature button.
The Extension to Cellular feature is activated.
o
The green LED next to the feature button turns on.
o
To deactivate extension to cellular (EC500):
1. Press the EC500 feature button.
The Extension to Cellular feature is deactivated.
o
The green LED next to the feature button turns off.
o
If you use a Feature Access Code to enable EC500, the forwarding icon does not appear in the phone display.
o
Ringing tones are produced by an incoming call. Handset tones are those which you hear through the handset.
Ringing Tones
1 ring - A call from another extension.
o
2 rings - A call from outside or from the attendant.
o
3 rings - A priority call from another extension, or from an Automatic Callback call you placed.
o
ring-ping (half ring) - A call redirected from your telephone to another because Send All Calls or Call
o
Forwarding All Calls is active.
Handset Tones
busy signal - A low-pitched tone repeated 60 times a minute; indicates the number dialed is in use.
o
call waiting ringback tone - A ringback tone with a lower-pitched signal at the end; indicates that the
o
extension called is busy, but the called party has been given a call waiting tone.
call waiting tone - One, two, or three beeps of high-pitched tone, not repeated; indicates an incoming call is
o
waiting to be answered. Number of beeps designates the source: 1 for an internal call, 2 for an outside or
attendant call, 3 for a priority call.
confirmation tone - Three short bursts of tone; indicates a feature activation or cancellation has been accepted.
o
coverage tone - One short burst of tone; indicates your call will be sent to another extension to be answered by
o
a covering user.
dial tone - A continuous tone; indicates dialing can begin.
o
intercept/time-out tone - An alternating high and low tone; indicates a dialing error, a denial of the service
o
requested, or a failure to dial within a preset interval (usually 10 seconds) after lifting the handset or dialing the
previous digit.
recall dial tone - Three short bursts of tone followed by a steady dial tone; indicates the feature request has
o
been accepted and dialing can begin.
reorder tone - A fast busy tone repeated 120 times a minute; indicates all trunks are busy.
o
ringback tone - A low-pitched tone repeated 15 times a minute; indicates the telephone dialed is being rung.
o
Redial
Simultaneous Ringing
Tones and Their Meanings
1616 IP Telephone End User Guide | 18 |
P a g e
Imprimir página