AirGorilla PCO/UV N-Duct Manual do instalador - Página 2

Procurar online ou descarregar pdf Manual do instalador para Filtro de ar AirGorilla PCO/UV N-Duct. AirGorilla PCO/UV N-Duct 8 páginas.
Também para AirGorilla PCO/UV N-Duct: Manual do Proprietário (6 páginas)

FACTS ABOUT THE PCO/UV N-DUCT™ UNIT
AirGorilla™ combines the power of two highly regarded contaminant fighting technologies -
ultraviolet light and PCO (photocatalytic oxidation). The PCO/UV N-Duct™ utilizes two,
Dual-Radiant™ germicidal ultraviolet lamps that produce a total of 210 microwatts of
contaminant killing power (measured at 1 mtr.). In addition, the UV lamps illuminate a
unique photocatalytic filter of nano-technology titanium dioxide that provides higher levels of
destruction and on a broader range of contaminants. As air circulates through the air duct
system and passes the PCO/UV N-Duct™ unit, these powerful technologies destroy
airborne bacteria, mold, fungi, viruses, volatile organic compounds (VOC's) & odors.
IMPORTANT POINTS FOR THE INSTALLER
AirGorilla' s PCO/UV N-Duct™ unit is designed for ease of installation and service. Cut just
one hole and install. The unit never needs to be "un-installed" to replace the UV lamps.
Simply open the door and change them out. And thanks to the innovative Display Panel and
micro-circuitry, there is no guesswork if the UV lamps are working or if they need to be
replaced.
INCLUDED IN THIS BOX
• PCO/UV N-Duct™ System with PCO Filter Attached
• 2 Dual-Radiant™ Ultraviolet Lamps
• Mounting Template
• Installation Manual
Owner' s Guide
TOOLS/SUPPLIES REQUIRED FOR INSTALLATION
Installation into Metal Duct or Plenum
• Metal Cutting Snips
• Electric Drill
• Sheet Metal Screws
• Wire Cutters
• UV Eye Protection
BEFORE INSTALLING
• Read all instructions carefully
• Be attentive to all warnings and cautions
• Installation should only be performed by a qualified installer
Installation into Ductboard
Ductboard Knife
Duct Tape (or screws/nuts if using
metal mounting brackets)
Wire Cutters
UV Eye Protection
1