Gardena 1892 Manual do operador - Página 7

Procurar online ou descarregar pdf Manual do operador para Equipamento para relva e jardim Gardena 1892. Gardena 1892 19 páginas. Water control
Também para Gardena 1892: Manual do operador (18 páginas), Manual do operador (19 páginas)

Imprimir página

Active (manual) watering v (Fig. I):

1 Manual watering

Setting schedules v (Fig. H):

1 Set schedule | 2 Schedule 1

Configure and save up to 6 different watering

schedules by setting the start time, duration and

weekdays for each one. Schedules can be acti-

vated or deactivated by pressing on / off (see fig. H).

Default display v (Fig. J):

1 Idle screen | 2 Programs

Seasonal watering duration v (Fig. K):

1 Menu: Seasonal Run Time | 2 Regular Run Time |

3 Reduce Watering

You can reduce the durations set for all schedules

at once in 10% increments, from 100% down

to 10%. This saves you having to change each

of the 6 schedules individually.

Tip: Less watering is required in the spring and

autumn than in the height of summer. Simply set

the maximum watering duration for high summer

as the default. Then reduce the watering duration

for all schedules at once in convenient 10 % incre-

ments when there is less need for watering.

Note: When you change the percentage, the dura-

tion is adjusted within the schedules and the

"cloud" symbol appears. If the duration is not

altered (= 100 %), the "sun" symbol is displayed.

Rain pause v (Fig. L):

1 Menu: Rain pause | 2 Pause / 3 days

Pauses all watering operations without changing

the set schedules. You can select any number of

days between 1 and 9. At the end of the pause,

all schedules are reactivated.

Deleting a schedule v (Fig. M):

1 Menu: Delete schedule | 2 Delete schedule 1

Soil Moisture Sensor v (Fig. D and N):

1 Menu: Soil Moisture Sensor

Once the soil is sufficiently moist, a watering opera-

tion is interrupted or a schedule is disabled so that

it cannot be activated. This does not affect active

(manual) watering.

Soil Moisture Sensor, Art. 1867

(optionally available)

1 Connect soil moisture sensor

Once a soil moisture sensor has been

connected, the next step is to specify the future

switching point in the "Soil moisture sensor" menu.

This is the soil moisture level at or above which

watering is not to be carried out (see GARDENA

Soil Moisture Sensor Operating Instructions).

There are 5 levels to choose from.

– During normal operation, the currently measured

level is displayed constantly.

– The switching point as of which the sensor sig-

nals that the soil is moist – thereby preventing

watering – is selected via the number of levels.