Garmin GPSMAP 500 Series Adenda ao Manual do Piloto - Página 23

Procurar online ou descarregar pdf Adenda ao Manual do Piloto para Ecrã de aviónica Garmin GPSMAP 500 Series. Garmin GPSMAP 500 Series 27 páginas. Flat-mount kit
Também para Garmin GPSMAP 500 Series: Manual de instruções (6 páginas), Manual de referência rápida (2 páginas), Manual de referência (2 páginas), Manual de instruções (28 páginas), Modelo (2 páginas), Modelo (1 páginas), Manual de configuração (2 páginas), Manual de início rápido (4 páginas), Manual do Proprietário (38 páginas), Manual do Proprietário (44 páginas), Manual do Piloto (28 páginas), Manual de instruções de instalação (34 páginas), Manual de referência rápida (2 páginas)

Imprimir página
Garmin GPSMAP 500 Series Adenda ao Manual do Piloto

TCAD Setup Page

The Ryan TCAD Setup Page is accessed from the Traffic Page. The TCAD Setup Page allows you to
configure traffic data. The definitions of the available options are listed in the TCAD Pilot' s Handbook.
To change a TCAD setup option:
1. Turn the small right knob to select the Traffic Page. Press MENU to display the Page Menu. Turn the small
right knob to select 'Setup?' and press ENT.
2. The flashing cursor highlights the Mode field. Turn the small right knob to select the mode and press ENT.
The mode selection determines which shield definition to display and change. Turn the large right knob to
select the desired remaining options fields. Turn the small right knob to select the desired option and press
ENT.
3. Return to the Traffic Page by pressing CLR.
Traffi c Page Fields
There are two selectable fields on the Traffic Page: the Operating Mode Field and the Barometric
Pressure Field. The Operating Mode Field selects the TCAD operating mode. Please, refer to the TCAD
Pilot' s Handbook for a complete description of all modes of operation. For the 9900BX model, this field is
replaced with the SKYWATCH style altitude mode.
To select the Operating Mode:
1. From the Traffic Page, press CRSR to highlight the operating mode field. Turn the small right knob to select
the desired operating mode and press ENT.
The traffi c display range is automatically set to the shield size and cannot be changed
(9900B only).
Section 4
Ryan TCAD Interface
Ryan TCAD Setup Page (9900B only)
21