All American Scoreboards MP-3913 Manual de instruções e de serviço - Página 5

Procurar online ou descarregar pdf Manual de instruções e de serviço para Monitor All American Scoreboards MP-3913. All American Scoreboards MP-3913 20 páginas. Bmx display

Imprimir página

2.4 Electrical connections

The MP-3913 timer requires a 120 VAC, 20 AMP circuit.

To protect the MP-2002 control from damage, it is advisable to disconnect the

control and store in a dry secure area when not in use.

This equipment is ETL (Electronics Testing Laboratories) CSA and NRTL approved

and complies with the requirements in part 15 of the FCC rules for a class A

computing device. Operation of this equipment in a residential area may cause

unacceptable interference to radio and television reception, requiring the operator to

take whatever steps are necessary to correct the interference.

3. CONTROL CONSOLE OPERATION

3.1 Scoreboard Power

Turn on the power to the display. The display will show "0:00" .

3.2 Console Power

Push ON/OFF

Push ON/OFF a second time to shut the console off.

When first turned on; the console display should show

Enter the two digit code (94) shown in the lower center window of the keyboard as in the

following example:

Push

CODE

When the proper code has been entered, the console display will show

3.3 Console Display

The 4 digit Liquid Crystal Display (LCD) shows the information entered from the keyboard.

3.4 Display Setting and Control

To set 152, Push:

IMPORTANT !!!

once to turn the console on.

ENTER .

SET

NOTE

CODE .

ENTER .