Brother MFC-J491DW Manual de referência - Página 23

Procurar online ou descarregar pdf Manual de referência para Impressora tudo em um Brother MFC-J491DW. Brother MFC-J491DW 32 páginas. Brief explanations for routine operations
Também para Brother MFC-J491DW: Manual de referência (34 páginas), Manual de configuração rápida (2 páginas), Manual de configuração rápida (2 páginas), Manual (19 páginas), Manual (22 páginas), Manual de referência (26 páginas), Manual de configuração rápida (2 páginas), Manual de configuração rápida (2 páginas), Manual de Segurança do Produto (21 páginas)

Imprimir página

Error Message

Cannot Detect Ink Replace the cartridge with a Brother Original ink cartridge. If the error

Data Remaining

Disconnected

Document Jam

High Temperature

Ink Absorber Full The ink absorber box must be replaced. Contact Brother customer

Ink Low

Jam A Inside/

Front

Repeat Jam A

Jam B Front

Repeat Jam B

Front

Action

message remains, contact Brother customer service or your local

Brother dealer.

Press Stop/Exit. The machine will cancel the job and clear it from the

memory. Try to print again.

Try to send or receive again.

If calls are stopped repeatedly and you are using a VoIP (Voice over

IP) system, try changing the Compatibility to Basic (for VoIP).

See Related Information: Telephone Line Interference/VoIP at the end

of this section.

The document was not inserted or fed correctly, or the document

scanned from the ADF was too long.

For more detailed information, see the Online User's Guide: Document

Jams.

After cooling the room, allow the machine to cool down to room

temperature. Try again when the machine has cooled down.

service or your local Brother Authorised Service Centre to have your

machine serviced.

One or more of the ink cartridges are near the end of their lives.

Order a new ink cartridge. You can continue printing until the LCD

displays Replace Ink.

For more detailed information, see the Online User's Guide: Replace

the Ink Cartridges.

• You can still scan even if the ink is low or needs to be replaced.

Remove the jammed paper.

For more detailed information, see the Online User's Guide: Printer

Jam or Paper Jam.

Make sure the paper guides are set to the correct paper size.

Do not put more than one sheet of paper in the manual feed slot at any

one time. Wait until the LCD prompts you to load another sheet of

paper before you feed the next sheet of paper in the manual feed slot.

Remove the jammed paper.

For more detailed information, see the Online User's Guide: Printer

Jam or Paper Jam.

Make sure the paper guides are set to the correct paper size.