AEG 6000K Manual de Instruções - Página 21

Procurar online ou descarregar pdf Manual de Instruções para Hob AEG 6000K. AEG 6000K 25 páginas. Fitted glass ceramic cooking units
Também para AEG 6000K: Instruções de utilização e de instalação (16 páginas), Instruções de utilização e de instalação (16 páginas)

Installation Instructions

UK only

Any electrical work required to install this hob should be carried

out by a qualified electrician or competent person, in accordance

with the current regulations.

This hob must be earthed.

The manufacturer declines any liability should these safety measures

not be observed.

This hob is designed to be connected to a 230-240 50 HZ AC electrical

supply.

Before switching on, make sure the electricity supply voltage is the

same as that indicated on the hob rating plate. The rating plate is

located on the bottom of the hob.

The hob is supplied without supply cable. A 3 core flexible supply cable

must be fitted, in accordance with the specifications given in the table.

Connection via

Cooker Control Cir-

cuit

The hob must be connected to a double pole switch with a minimum

gap of 3 mm. Between the switch contacts and of a type suitable for

the required load in compliance with the current electric regulations.

The switch should be sited within 2 m of the hob and be easily accessi-

ble upon completion of the installation.

The switch must not break the yellow and green earth cable at any

point.

Min. size Cable/Flex

6 mm

Cable/Flex Type

PVC / PVC twin and

earth

Fuse

30 Amp