Fujitsu PRIMERGY DX920 S3 Manual de instruções - Página 8

Procurar online ou descarregar pdf Manual de instruções para Servidor Fujitsu PRIMERGY DX920 S3. Fujitsu PRIMERGY DX920 S3 14 páginas.

Imprimir página

XIV

iRMC S3, Graphics

Section

Graphic Controller is part of the onboard Management Controller iRMC S3.

Other graphics are not possible.

The iRMC S3 advanced pack is included in the system delivery.

A corresponding license order is not necessary.

Mezzanine cards for Dual Socket Server Blade

Section

The Dual Server Blade supports the following optional mezzanine cards.

A Fibre Channel Switch / Pass-Thru blade, an Ethernet LAN Switch / Pass-Thru blade,

respectively an InfiniBand switch is required in the system unit for this functionality.

SAS Mezz Cards require an SAS switch for each SAS link

SAS Mezz Cards have to be installed in Mezz Card slot 2 on Server Blade

S26361-F4480-E1

PY SAS HBA Mezz Card 6Gb

HBA

SAS 2.0

PCIe Gen2 interface

4x SAS links to midplane

max. 1x per Server Blade

Requires an Ethernet LAN

Switch, IBP or Pass-Thru

Blade for each channel.

S26361-F3331-E1

PY Eth Mezz Card 1Gb 4 Port

2x Intel Zoar controller

4x 10/100/1000 Mbit/s.

pluggable on the main board,

four channel 1Gbit/s

PCIe x4 Interface

max. 2x per Server Blade

S26361-F3997-E1

PY Eth Mezz Card 10Gb 2 Port

Intel 82599EB LAN Controller

2x 10Gbit/s.

pluggable on the main board,

0 - 2x

Dual channel 10Gbit/s

PCIe x8 Interface

max. 2x per Server Blade

S26361-F3592-E532

PY CNA Mezz Card 10Gb 2 Port

Emulex OCe11102 compatible

pluggable on the main board

MC-CNA112E

Dual channel 10Gbit/s

PCIe x8 Interface

max. 2x per Server Blade

R: see separate BX900 System Unit configurator, sheet "1 GB Ethernet"

S: see separate BX900 System Unit configurator, sheet "10 GB Ethernet"

T: see separate BX900 System Unit configurator, sheet "Fibre Channel"

U: see separate BX900 System Unit configurator, sheet "InfiniBand"

V: see separate BX900 System Unit configurator, sheet "CB SAS"

https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/current/Pages/default.aspx

S26361-F4531-E30

PY SAS Expander Mezz. Card

for connectivity between

SAS RAID HDD Module and

SAS Connection Blade

4x SAS links to midplane

max. 1x per Server Blade

S26361-F4531-E60

PY Enhanced Mezz Bracket/Riser

max. 1x per Server Blade

Requires a Fibre Channel

Switch for each channel.

S26361-F3874-E1

S26361-F3992-E2

PY FC Mezz Card 8Gb 2 Port

PY IB CX2 Mezz Card 40Gb 2 Port

Emulex LPe12002 compatible

Interface to midplane:

pluggable on the main board,

2x 10Gb/s(SDR), 2x 20Gb/s(DDR)

MC-FC82E

2x 40Gb/s(QDR)

Dual channel 8Gbit/s

Dual channel 40Gbit/s each

PCIe x8 interface

max. 2x per Server Blade

Fujitsu PRIMERGY Server

System configurator and order-information guide

PRIMERGY BX920 S3

Status: 2013-12-30

SAS Expander Mezz Card

can only be used with

PY SAS RAID HDD Module

S26361-F4531-E513

Requires an InfiniBand

Switch for each Mezz Card.

S26361-F4534-E1

PY IB CX3 Mezz Card 56Gb 2 Port

Interface to midplane:

2x 10Gb/s(SDR), 2x 20Gb/s(DDR)

2x 40Gb/s(QDR) 2x 56Gb/s(FDR)

Dual channel 56Gbit/s each

PCIe x8 interface

max. 2x per Server Blade

8 of 14