Fujitsu D2519 Manual técnico - Página 30
Procurar online ou descarregar pdf Manual técnico para Placa-mãe Fujitsu D2519. Fujitsu D2519 43 páginas. For rx300 s4
Imprimir página
Interfaces and connectors
The serial interface COM1 can be used as default interface or to communicate
with the iRMC.
LAN connectors
On this system board you will find three LAN controllers: two Gigabit LAN
controller (Broadcom BCM5708) and a service LAN controller.
The Gigabit LAN controller BCM5708 supports the transfer rates of
10 Mbit/s, 100 Mbit/s and 1 Gbit/s. The Service LAN controller supports the
transfer rates of 10 Mbit/s and 100 Mbit/s.
The LAN controllers support WOL function through Magic Packet™.
It is also possible to boot a device without its own boot hard disk via LAN. Here
Intel PXE is supported.
The service LAN port serves as management interface and is prepared for
RemoteView.
The LAN connectors are equipped each with two LEDs (light emitting diode)
indicating the transfer rate and the activity.
Figure 7: LAN connector system LAN controller
1 LAN transfer rate green +
2 LAN link/activity
30
2
off
yellow
green
on
yellow
on
green
on
off
flashing
Technical Manual
1
transfer rate 10 Mbit/s
transfer rate 100 Mbit/s
transfer rate 1000 Mbit/s
LAN connection
no LAN connection
LAN transfer
Features
D2519 (RX300 S4)