Indesit WITL 86 Manual de instruções de utilização - Página 7

Procurar online ou descarregar pdf Manual de instruções de utilização para Máquina de lavar roupa Indesit WITL 86. Indesit WITL 86 36 páginas.

Indesit WITL 86 Manual de instruções de utilização

Personalisations

C

Setting the temperature

Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 6).
The temperature can be lowered, or even set to a cold wash (

Setting the spin speed

Turn the SPIN SPEED knob to set the spin speed for the programme selected.
The maximum spin speeds for each programme are as follows:
Programmes
Maximum spin speed
Cottone
800 rpm
Synthetics
800 rpm
Wool
600 rpm
Silk
no
The spin speed can be lowered, or the spin cycle can be excluded altogether by selecting symbol
The washing machine will automatically prevent you from selecting a spin speed higher than the maximum
speed for each programme.

Functions

To enable a function:
1. press the button corresponding to the desired function, according to the table below;
2. the function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the
programme set.
Option
Effect
Delay
Delays the start
Timer
of the wash by
up to 24 hours.
Bleaching
Bleaching cycle
designed to
remove the
toughest stains.
Easy iron
This option
reduces the
amount of
creasing on
fabrics, making
them easier to
iron.
Extra Rinse
Increases the
efficiency of the
rinse.
Comments
Pess the button repeatedly until the LED corresponding to the
desired delay is turned on. The fifth time the button is pressed, the
function will be disabled.
N.B.: Once you have pressed the Start/Reset button, the delay can
only be decreased if you wish to modify it.
Please remember to pour the bleach into extra compartment 4
(see page 8). This option is incompatible with the EASY IRON
option.
If you set this option, programmes 4, 5, 6, 7 and Delicate Rinse
will be suspended, leaving the laundry to soak (Anti-crease) and
icon
will flash:
- to conclude the cycle, press the START/RESET button;
- to run the draining cycle alone, set the knob to the relative
symbol
and press the START/RESET button.
This option is incompatible with the BLEACHING option.
Recommended when the appliance has a full load or with large
quantities of detergent.
).
GB
.
Enabled with
programmes:
All
2, 3, 4, 5,
Rinse cycles.
3, 4, 5, 6, 7,
8, 9, 10 and
Rinse cycles
1, 2, 3, 4, 5,
8, 9, 10, 12,
13 and Rinse
cycles.
7