AEG ATB81011NX Manual do utilizador - Página 10
Procurar online ou descarregar pdf Manual do utilizador para Congelador AEG ATB81011NX. AEG ATB81011NX 16 páginas.
Imprimir página
10
www.aeg.com
Problem
The appliance is noisy.
Audible or visual alarm is on. The cabinet has been re-
The compressor operates
continually.
There is too much frost and
ice.
The compressor does not
start immediately after
pressing the FROSTMATIC,
or after changing the tem-
perature.
Water flows on the floor.
Temperature cannot be set.
Possible cause
The appliance is not suppor-
ted properly.
cently switched on.
The temperature in the ap-
pliance is too high.
Temperature is set incorrect-
ly.
Many food products to be
frozen were put in at the
same time.
The room temperature is too
high.
Food products placed in the
appliance were too warm.
The door is not closed cor-
rectly.
The FROSTMATIC function
is switched on.
The door is not closed cor-
rectly or the gasket is de-
formed/dirty.
Food products are not wrap-
ped properly.
This is normal, no error has
occurred.
The melting water outlet is
not connected to the evapo-
rative tray above the com-
pressor.
The FROSTMATIC function
is switched on.
Solution
Check if the appliance
stands stable.
Refer to "Door Open
Alarm"or "High Tempera-
ture Alarm".
Refer to "Door Open
Alarm"or "High Tempera-
ture Alarm".
Refer to "Operation" chap-
ter.
Wait a few hours and then
check the temperature
again.
Refer to climate class chart
on the rating plate.
Allow food products to cool
to room temperature before
storing.
Refer to "Closing the door".
Refer to "FROSTMATIC
function".
Refer to "Closing the door".
Wrap the food products bet-
ter.
The compressor starts after a
period of time.
Attach the melting water
outlet to the evaporative
tray.
Switch off FROSTMATIC
manually, or wait until the
function resets automatically
to set the temperature. Refer
to "FROSTMATIC function"