AEG LAVATHERM 57810 Informações do utilizador - Página 17
Procurar online ou descarregar pdf Informações do utilizador para Secador AEG LAVATHERM 57810. AEG LAVATHERM 57810 32 páginas. Condensation dryer
Também para AEG LAVATHERM 57810: Informações do utilizador (32 páginas)
Imprimir página
Clean the entire filter area
3
The strainer area does not have to be cleaned after every drying cycle,
but should be checked regularly and cleaned of fluff if necessary.
6. To do this, grip the top of the large
mesh filter and pull it forwards un-
til it comes loose from the two
brackets.
7. Remove fluff from the entire filter
area. It is best to use a vacuum
cleaner for this purpose.
8. Press both journals of the large
mesh filter into the brackets on the
loading door until they snap into
place.
9. Re-insert fine strainer.
10. Press against the large mesh filter
until it locks into the interlock.
3
If the fine strainer is not fitted, the
large mesh filter will not snap into
place and the loading door cannot
be closed.
Cleaning the door seal
Wipe the door seal with a damp cloth immediately after the drying cy-
cle has finished.
17