AEG LAVATHERM 57810 Informações do utilizador - Página 18
Procurar online ou descarregar pdf Informações do utilizador para Secador AEG LAVATHERM 57810. AEG LAVATHERM 57810 32 páginas. Condensation dryer
Também para AEG LAVATHERM 57810: Informações do utilizador (32 páginas)
Imprimir página
Emptying the condensate tank
Empty condensate tank after every drying cycle.
If the condensate tank is full, an active programme will break off auto-
matically and the EMPTY WATER (RESERVOIR) display will light up. In
order to continue the programme, the condensate tank must first be
emptied.
1
Warning! The condensate is not suitable for drinking or for preparing
foodstuffs.
1. Take out drawer containing con-
densed water container
completely (1) and pull up the con-
densed water container's drainage
pipe as far as it will go (2).
2. Pour condensed water out into a
basin or similar receptacle.
3. Slide outlet connections in and re-
fit condensate tank.
If the programme has been inter-
rupted as a result of the conden-
sate tank being full:
Press the START/PAUSE (START/
PAUZE) button to continue the
drying cycle.
3
The condensate tank has a volume of approx. 4 litres. This is sufficient
for around 6kg of laundry which has previously been spun at 800 revo-
lutions/minute.
3
The condensate can be used as distilled water, e.g. for steam ironing.
However first filter the condensate (e.g. with a coffee filter) to remove
any residue and small pieces of fluff.
Cleaning heat exchanger
If the HEAT EXCHANGER (WARMTEWISSELAAR) display is illuminated,
the heat exchanger needs to be cleaned.
1
Caution! Operating when the heat exchanger is clogged with lint can
damage the dryer. This also increases energy consumption.
18