Acard ANS-9010 Manual de instalação rápida - Página 4
Procurar online ou descarregar pdf Manual de instalação rápida para Hardware informático Acard ANS-9010. Acard ANS-9010 18 páginas. 5.25” ram disk
Imprimir páginaEnglish
*Important notice:
1. Do not connect SATA power and battery power cores to ANS-9010B while installing and/or
exchanging DDR2 SDRAM DIMM.
2. CF card is required to be larger or equal than the total capacity of RAM to be able to backup all
data in memories.
3. To ensure the functionality and stability, please use the same brand, size and series of DDR
SDRAM DIMM in the ANS-9010. ( check the compatibility list on the ACARD website)
4. Before install, please disable the SSC of the SATA controller to avoid compatibility issue.
5. The ANS-9010 supports both ECC and Non-ECC DDR2 SDRAM DIMM. It does not support
Buffered nor Registered DDR2 SDRAM DIMM.
6. ANS9010 was built-in with ECC Emulation function. This function will be auto disabled when
ECC DDR2 DIMM is installed. When using the ECC DIMM, users can obtain full capacity as
RAM Disk. However, one ninth of the capacity will be reserved for restoring ECC data if Non-
ECC DIMM is used. (ex. ECC 2Gx8=16G RAM DISK; Non-ECC 2Gx8x8/9=14.2GB RAM Disk)
Overview
ACARD RAM Disk is a solid state disk make up DRAM memory modules, for faster than the
traditional hard drives and flash drives. With the speedy random access rate and shorter access
time, RAM Disk is definitely suitable for graphics designs and database systems. It also supports
an CF slot for data backup / restore to prevent data lost.
Features
●
Supports up to 64GB amount of memory
●
Supports ECC / Non-ECC DDR2 400/533/667/800*
●
Automatic data backup/restore between DDR2 memory and CF card
●
Built-in Lithium Battery
●
LED indicators for battery capacity, power status, SATA ports activity, backup status, restore
●
status
Driver less : need no driver on host side
●
*Note: Please refer to Compatibility List for DDR2 RAM Module
Specifications
●
Two SATA 3.0Gbps Interface ports
●
240-pin DDR2 DIMM module slots x 8
●
One CF socket in front panel
●
Lithium Battery of 7.4V 2400mAh, for data backup when power lost
●
Data transfer rate up to 400MB/sec
●
IOPS 20,000 per SATA port
●
Dimension: 42(H) x 145(W) x 214 (D) mm
●
Packing
●
ANS-9010 x1
●
User Install Guide x1
●
Internal SATA Cable 50cm x2
●
15pin SATA Power Cable x1
●
Screw x4
●
Lithium Battery x1
●
(warranty: 12 months)