Aqua Pulse Spas Trinity Deluxe Spa Manual do utilizador - Página 7
Procurar online ou descarregar pdf Manual do utilizador para Banheira de hidromassagem Aqua Pulse Spas Trinity Deluxe Spa. Aqua Pulse Spas Trinity Deluxe Spa 18 páginas.
Imprimir página
just apply the amounts of chemical that they tell you to apply. The reason for this is that they might set the
parameters differently to what your spa requires.
Water chemistry test history showing results for Free Chlorine, Total Chlorine, pH, Alkalinity, Calcium Hardness &
Cyanuric Acid, must be kept as a dated once-a-month digital reference as part of your warranty terms. This test
history will be required in the event of a warranty claim. It is a requirement of the Warranty Terms to keep dated
once-a-month digital water test result of the water chemistry supplied from a professional pool or spa store. Your
warranty will be made void if you cannot show these results.
THE FOLLOWING CHEMICALS CANNOT BE USED IN YOUR SPA:
Bromine, Liquid chlorine, Hydrochloric acid, Trichlor chlorine, Dichlor chlorine, Stabilized chlorine, Cyanuric acid,
Magnesium, Hydrogen peroxide & Polyhexamethylene biguanide.
SOME OF THESE PRODUCT WILL MAKE YOUR FIBREGLASS SPA SHELL DEFORM IN SHAPE & CREATE
BUBBLES & HOLES IN THE SPAS ACRYLIC LAYER.
Your warranty will be made void if you use any of these products.
HOW TO REMOVE YOUR SPAS FILTERS
1.
Lift the face plate on the top of the filter box vertically until it separates away
from the filter box.
2. You will see the filters inside the filter box, to remove the filters turn the handle
on the top of the filters anti-clockwise until you can lift the filters out of the filter
box.
3. To reinstall the filters, reverse these steps.
Do not overtighten the filters, they only need to be lightly screwed in. Overtightening the
filters will break them and is not covered under warranty.
Note:
The black filter face will go white where the water and air meets from chemical exposure.
This is unpreventable and can occur very quickly if you over sanitize the water.
WEEKLY FILTERS CLEANING
Once a week remove the filters from the spa and wash thoroughly with a garden hose, then place the filter in a
bucket of cold water and add 125ml of Filter Cleaner & Degreaser #9 or Filter Cleaner & Degreaser 1Litre Bottle.
Agitate the water and leave the filter submerged to soak for 24 hours. After 24hours remove the filter, wash it
thoroughly and allow it to completely dry out in an area exposed to the sun or wind.
It is recommended to purchase a spare filter and alternate between the filter each week to make the cleaning
process easier. Filters which are not cleaned weekly can cause your spa to stop cleaning & heating.
You filter needs to be replaced every twelve months, however if you are rotating between two filters this will
require replacement every two years. To order your replacement filter
supplies-parts/universal-cartridge-filter/
FILLING YOUR SPA WITH WATER – AVOIDING AIR LOCKS
The correct way to fill your spa with water is to remove the spas filters and
place your hose inside the filter box. Be sure to remove the fitting off the
hose to prevent it from falling into the spas plumbing.
Placing the hose inside the spas main seating area may cause a build-up of
air inside the plumbing creating an air lock. Air locks can stop the pumps and
heater from working.
To help avoid this problem ensure you fill up the spa through the filter box. You can tell if you have an air lock by
turning on the pumps, if no water appears to circulate through the system it is very likely that you have an air lock.
To resolve this problem, turn the pump off and loosen the unions at the side of the suction end of the pump until
water begins to flow through, then retighten the union and try turning the pump on again.
Alternatively contact the store of purchase for advice on other ways to remove an air lock.
Note:
Please ensure the drain fitting is closed before filling the spa with water, see instructions on page 8.
HARDCOVER INSTALLATION
Locate the green bag, which is taped to the spas packaging. This bag has the screws to fit your hardcover locks to
the spas cabinet as well as a key for the hardcover locks. Use the smaller screws supplied in this bag.
https://www.aquapulsespas.com.au/spa-
7