Avtec AVC181 Manual do utilizador - Página 4
Procurar online ou descarregar pdf Manual do utilizador para Câmara digital Avtec AVC181. Avtec AVC181 6 páginas. Regular camera 960h ultra resolution series
Imprimir páginaNOTE: Focus or Flange-Back Ring Adjustment
1. Mount the lens
by turning it clockwise on the lens mount of the camera.
2. Loosen the screws on the flange-back adjusting ring.
3. Turn the flange-back adjusting ring to the desired position.
4. Tighten the screws on the flange-back adjusting ring.
PRECAUTIONS
Do not install the camera in an environment where the humidity or temperature is high
Do not install the camera under the unstable lighting condition
Do not expose the camera to rain or moisture
Do not keep the camera face to strong light directly
Do not touch the front glass of the camera
Do not use other than specified power source
Do not disassemble the camera
CAMERA PARAMETERS
There are five buttons on the camera rear panel for users to further configure camera parameters.
Menu Tree
For options with
, press the button "
SUB-MENU
OPTIONS
LENS
SHUTTER / AGC
If you want to ...
Enter the camera configuration menu
Move to the sub-menu you want
Change setting
Enter the configuration page of an option
" (Enter) to enter their respective setting pages.
MANUAL
AUTO
TYPE
MODE
SPEED
AUTO
HIGH LUNINANCE
LOW LUMINANCE
MANUAL
MODE
SHUTTER
AGC
Flange Back Adjusting Ring
Back focal lock hexagonal bolt
Press ...
MENU
↑ / ↓
← / →
ENTER
DC / VIDEO
AUTO / OPEN / CLOSE
0 ~ 255
MODE
BRIGHTNESS
MODE
BRIGHTNESS
SHUT + AGC
1/50; 1/120; 1/250; 1/500; 1/1000; 1/2000;
1/4000; 1/10000
6.00 / 12.00 / 18.00 / 24.00 / 30.00 / 36.00 /
42.00 / 44.80
3
SHUT
0 ~ 255
AGC / OFF
x0.25 / x0.50 /
x0.75 / x1.00