5
Select your computer model and the Product Support page of your computer appears.
6
Click Get drivers and click Drivers and Downloads.
The Drivers and Downloads section opens.
7
Click Find it myself.
8
Click BIOS to view the BIOS versions.
9
Identify the latest BIOS file and click Download.
10
Select your preferred download method in the Please select your download method below window, click Download File.
The File Download window appears.
11
Click Save to save the file on your computer.
12
Click Run to install the updated BIOS settings on your computer.
Follow the instructions on the screen.
NOTE:
It is recommended not to update the BIOS version for more than three revisions. For example: If you want to update the
BIOS from 1.0 to 7.0, then install version 4.0 first and then install version 7.0.
System and setup password
Table 31. System and setup password
Password type
System password
Setup password
You can create a system password and a setup password to secure your computer.
CAUTION:
The password features provide a basic level of security for the data on your computer.
CAUTION:
Anyone can access the data stored on your computer if it is not locked and left unattended.
NOTE:
System and setup password feature is disabled.
Assigning a system password and setup password
You can assign a new System Password only when the status is in Not Set.
To enter the system setup, press F2 immediately after a power-on or re-boot.
1
In the System BIOS or System Setup screen, select Security and press Enter.
The Security screen is displayed.
2
Select System Password and create a password in the Enter the new password field.
Use the following guidelines to assign the system password:
•
A password can have up to 32 characters.
•
The password can contain the numbers 0 through 9.
•
Only lower case letters are valid, upper case letters are not allowed.
•
Only the following special characters are allowed: space, ("), (+), (,), (-), (.), (/), (;), ([), (\), (]), (`).
3
Type the system password that you entered earlier in the Confirm new password field and click OK.
4
Press Esc and a message prompts you to save the changes.
5
Press Y to save the changes.
The computer reboots.
Description
Password that you must enter to log on to your system.
Password that you must enter to access and make changes to the
BIOS settings of your computer.
System setup
23
Imprimir página