Dell PowerVault 110T SDLT320 Manual do utilizador - Página 34
Procurar online ou descarregar pdf Manual do utilizador para Armazenamento Dell PowerVault 110T SDLT320. Dell PowerVault 110T SDLT320 44 páginas. User manual
Também para Dell PowerVault 110T SDLT320: Manual do utilizador (23 páginas)
Imprimir página
Back to Contents Page
Specifications: Dell™ PowerVault™ 110T SDLT 320 Tape Drive User's Guide
• Product Specifications • Functional Specifications • Environmental Specifications • Recording Media Specifications
NOTE: These specifications are provided by the manufacturer for information purposes only and do not constitute an extension of Dell's warranty to you. Dell's
warranty is contained in the documentation for your system.
Product Specifications
Manufacturer
Manufactured for Dell by Quantum Corp.
Model Number
DELL PowerVault 110T SDLT 320 Tape Drive: SDLT Internal; SDLT External
Interface Type
LVD, Ultra 2 SCSI running at 80 MB/sec
Physical Dimensions
Table 1 provides physical dimensions for the tape system.
Table 1. Physical Dimensions
Description
Height
82.55 mm (3.25 in) without front bezel;
85.73 mm (3.38 in) with front bezel.
Width
146.05 mm (5.75 in) behind front bezel;
148.59 mm (5.85 in) with front bezel.
Depth
203.20 mm (8.00 in) measured from back of front bezel;
212.73 mm (8.38 in) including front bezel.
Weight
2.38 kg (5 lbs 4 oz)
Shipping Weight*
3.77 kg (8 lbs 5 oz)
* Weights depend on configuration. Note that for the shipping weight, the packaging may change.
Note: Mounting hole pattern for the bottom and sides of the system is industry standard.
Storage Capacity
The following provides native and compressed capacity ranges for the Super DLTtape I cartridge:
Native Storage Capacity = 160 GB
l
Compressed Storage Capacity = 320 GB (2:1 compression ratio)
l
In accordance with industry practice, a typical compression ratio of 2:1 is quoted. Actual compression ratios achieved depend on the redundancy of data files being recorded.
Data Integrity
SDLT data transfer errors are extremely rare; the following table shows the data integrity for the overall tape system.
Table 2. Data Transfer Error Rates
Error Type
Error Rates Recoverable READ
Detected, Unrecoverable READ
Undetected READ
Rewrite errors
Reliability (MTBF)
Mean time between failures (MTBF) for the tape system is 250,000 hours. Head life is a minimum of 30,000 tape motion hours, and an average of 50,000 tape motion hours.
Media durability is 1,000,000 passes over any single part of the tape.
Note that this specification does not warrant that predicted MTBF is representative of any particular unit installed for customer use. Actual figures vary from unit to unit.
Load and Unload Cycles
Load and unload cycles are rated at 15,000 for the cartridge itself. The following table shows the number of load and unload cycles and tape insertions the drive itself can
perform before it needs to be replaced.
Load/unload cycles
Tape insertions*
* An insertion is when a tape is inserted into the receiver, loaded to BOT, and unloaded.
Internal Version
Frequency
< 1 error in 10E6 bits read
< 1 error in 10E17 bits read
< 1 error in 10E27 bits read
< 5 per 10E6 bits written
100,000
100,000
Tabletop Version
164.46 mm (6.48 in)
174.75 mm (6.88 in)
320.04 mm (12.6 in)
6.27 kg (13 lbs 13 oz)
9.90 kg (21 lbs 13 oz)