Dell Cisco Catalyst 3850 PS Series Manual de configuração - Página 4

Procurar online ou descarregar pdf Manual de configuração para Interruptor Dell Cisco Catalyst 3850 PS Series. Dell Cisco Catalyst 3850 PS Series 10 páginas. Sans

Imprimir página

Dell Cisco Catalyst 3850 PS Series Manual de configuração

Introduction

This document illustrates how to configure Cisco® Catalyst 3850 switches for use with Dell™ PS Series storage

using Dell best practices. The recommended configuration uses a link aggregation group (LAG) for inter-switch

connections.

If you are following the

configuration guide.

For more information on Dell PS series SAN design recommendations, see the

Guide.

1.1

Audience

This switch configuration guide describes a verified configuration following Dell best practices for a PS Series

iSCSI SAN and is intended for storage or network administrators and deployment personnel.

1.2

Switch details

Table 1 provides an overview of the switch configuration. This switch configuration guide covers setup

instructions for all Catalyst 3850 switch models.

Cisco Catalyst 3850

Switch vendor

Switch model

Switch firmware

Note: For proper functionality, the switch must be at the firmware version shown in Table 1 before

proceeding with configuration. Using previous firmware versions may have unpredictable results.

Note: The latest firmware updates and documentation can be found at: www.cisco.com. This site requires a

Cisco Catalyst 3850 Switch Configuration Guide for Dell PS Series SANs | SCG3299

Rapid EqualLogic Configuration

Switch specifications

Cisco

Catalyst 3850

03.07.04E or later

16.3.1 or later

steps, use sections 1 and 2 in this switch

PS Series Configuration