Dell poweredge VRTX Manual de iniciação - Página 26
Procurar online ou descarregar pdf Manual de iniciação para Interruptor Dell poweredge VRTX. Dell poweredge VRTX 30 páginas. Server
Também para Dell poweredge VRTX: Manual do utilizador (35 páginas), Nota de lançamento (5 páginas), Manual de iniciação (14 páginas), Manual de Referência e Início Rápido (2 páginas), Manual técnico (45 páginas), Começar a trabalhar (2 páginas)
Imprimir página
- 1. Getting Started Guide
- 1. 1 Hardware and Initial Configuration
- 1. Switch Hardware
- 1. Initial Configuration of the Switch
- 2. Table of Contents
- 2. 2 Using the CLI
- 2. CLI Command Conventions
- 2. Accessing the Device through the CLI
- 2. Retrieving an IP Address
- 2. Security Management and Password Configuration
- 2. Configuring Login Banners
- 2. Startup Menu Procedures
- 2. Software Download
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
4 When the new image is downloaded, it is saved in the area allocated for
the other copy of the system image (image-2, as shown in the example).
The following is an example of the information that appears:
console# copy tftp://176.215.31.3/r2401-100048.ros image
Accessing file 'r2401-100048' on 176.215.31.3Ö
Loading r2401-100048 from 176.215.31.3:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Copy took 00:01:11 [hh:mm:ss]
Exclamation symbols indicate that a copying process is in progress. Each
symbol (!) corresponds to 512 bytes transferred successfully. A period
indicates that the copying process is timed out. Many periods in a row
indicate that the copying process failed.
5 Select the image for the next boot by entering the boot system command.
After this command, enter the show bootvar command to verify that the
copy indicated as a parameter in the boot system command is selected for
the next boot.
The following is an example of the information that appears:
console# boot system image-2
console# show bootvar
Images currently available on the Flash
Image-1 active
Image-2 not active (selected for next boot)
If the image for the next boot is not selected by entering the boot system
command, the system boots from the currently active image.
6 Enter the reload command. The following message is displayed:
console# reload
This command will reset the whole system and disconnect your current
session. Do you want to continue (y/n) [n]?
7 Enter Y. The device reboots.
Boot Image Download
Loading a new boot image from the TFTP server, updates the boot image.
The boot image is loaded when the device is powered on. A user has no
control over the boot image copies.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 3 / 6 / 1 3 - F O R P R O O F O N LY
26
Using the CLI
Plasma\GSG\Plasma_UGUsing_CLI.fm