Miele DA 249-2 Alu Instruções de utilização e de instalação - Página 19

Procurar online ou descarregar pdf Instruções de utilização e de instalação para Campânula de ventilação Miele DA 249-2 Alu. Miele DA 249-2 Alu 36 páginas.

Imprimir página

Miele DA 249-2 Alu Instruções de utilização e de instalação

^ Clean the filter

– by hand: with a nylon brush, warm

water with a little washing up liquid.

– in a dishwasher: place the filter

with the short side upright in the

lower basket, ensuring the spray arm

is not obstructed.

Note: some dishwasher detergents

may cause the surface of the metal

grease filter to discolour.

However, this will not affect the func-

tioning of the grease filter in any

way.

^ After cleaning leave the filter to dry

for a while on an absorbent surface

before putting it back in place.

^ When cleaning the stainless steel fil-

ter please also follow the cleaning in-

structions given for the housing.

^ When removing the filters for clean-

ing also clean off any residues of oil

or fat from the now accessible hous-

ing to prevent the risk of these catch-

ing fire.

^ After replacing the grease filter, press

the grease filter touch control for

approx. 3 seconds to re-set the oper-

ating hours counter.

The indicator lamp will go out.

^ If the grease filter is cleaned before

the operating hours counter has

reached its maximum, the grease fil-

ter touch control should be pressed

for approx. 6 seconds to reset the

counter to zero.

Cleaning and care

Replace the grease filter

^ Holding the grease filter at an angle

fit it into the front of the chimney and

then push it into position along the

front edge.

^ Then push it up into position at the

back making sure it clicks into posi-

tion at both sides.

Replace the stainless steel filter

^ Fit the stainless steel filter into the ap-

pliance so that it hooks into the re-

tainers at the back, then push it up-

wards at the front and make sure it

engages in the quick release mecha-

nism.