Miele DA 3160 Instruções de utilização e de instalação - Página 15

Procurar online ou descarregar pdf Instruções de utilização e de instalação para Campânula de ventilação Miele DA 3160. Miele DA 3160 40 páginas. Ventilation system
Também para Miele DA 3160: Instruções de utilização e de instalação (36 páginas), Instruções de utilização e de instalação (40 páginas), Dimensões (1 páginas), Instruções de utilização e de instalação (40 páginas), Instruções de utilização e de instalação (40 páginas), Instruções de utilização e de instalação (40 páginas)

Miele DA 3160 Instruções de utilização e de instalação
Before any cleaning or maintenance
work is carried out, disconnect the
cooker hood from the mains supply.
Ensure that:
– it is switched off at the wall socket
and the plug is withdrawn, or
– the fuse is withdrawn from the
fused spur connection unit, or
– the mains fuse is disconnected ,or
– the screw-out fuse is removed
(in countries where this is
applicable).
A microfibre "E-Cloth" is available from
the Miele UK Spare Parts Department,
which is suitable for cleaning surfaces
such as stainless steel, glass, plastic
and chrome without the use of
chemicals. It can be washed 300 times.

Housing

General notes
Warning: The surfaces and controls
are susceptible to scratches and
abrasions. Please observe the
following cleaning instructions.
^ All external surfaces and controls can
be cleaned using warm water with a
little washing-up liquid applied with a
well wrung-out soft sponge or cloth.
^ Wipe the surfaces dry using a soft
cloth.
Do not use too much water when
cleaning the controls. Water could
penetrate into the electronics and
cause damage.

Cleaning and care

Do not use:
– cleaning agents containing soda,
acids, chlorides or solvents,
– abrasive cleaning agents, e.g.
powder cleaners or cream cleaners
and abrasive sponges, as well as pot
scourers or sponges which have
been used previously with abrasive
cleaning agents. These will damage
the surface material.
Important for appliances with
stainless steel housing
(This infomation does not apply to the
controls).
Stainless steel surfaces can be cleaned
with a proprietary non-abrasive cleaning
agent designed specifically for use on
stainless steel.
To help prevent re-soiling, a proprietary
conditioning agent for stainless steel
(available from the Miele UK Spare Parts
Department or via the internet on
www.miele-shop.com) can also be used.
Follow the manufacturer's instructions,
and apply sparingly with an even
pressure in the direction of the "grain".
Controls
The controls may suffer
discolouration or damage if soiling is
left on them for too long. Remove
soiling straight away.
Observe the General notes on cleaning
earlier in this section.
Do not use stainless steel cleaning
agents on the controls.
15