Miele PUR 98 W Instruções de utilização e de instalação - Página 34
Procurar online ou descarregar pdf Instruções de utilização e de instalação para Campânula de ventilação Miele PUR 98 W. Miele PUR 98 W 40 páginas. Ventilation system
Também para Miele PUR 98 W: Instruções de utilização e de instalação (40 páginas), Instruções de utilização e de instalação (40 páginas), Instruções de utilização e de instalação (40 páginas), Instruções de utilização e de instalação (36 páginas)
Imprimir página
Installation
Electrical connection
The rangehood is supplied with a mains
connection cable with moulded plug
ready for connection to a suitable
earthed socket.
If the socket is not easily accessible or
if the appliance is to be hard-wired,
ensure that a suitable means of
disconnection is provided on the
installation side for each pole.
Risk of fire from overheating.
Connecting the rangehood to multi-
socket adapters or extension cables
can overload the cables.
For safety reasons, do not use an
extension cable or multi-socket
adapter.
All electrical work must be carried out
by a suitably qualified and competent
person in strict accordance with
national and local safety regulations.
For safety reasons, we recommend
using a suitable residual current device
(RCD) in the relevant electrical
installation for connecting the
rangehood.
If the mains connection cable is
damaged, it must only be replaced with
a specific mains connection cable of
the same type (available from Miele).
For safety reasons, such replacement
may only be carried out by a suitably
qualified and competent electrician or a
Miele authorised service technician, in
order to avoid a hazard.
The data plate indicates the nominal
power consumption and the connection
data. Compare this information with the
data of the on-site electrical
34
connection.
If in any doubt, consult a qualified
electrician.
Temporary or permanent operation with
a self-sufficient or non-mains
synchronous energy supply system
(e.g. isolated networks, back-up
systems) is possible. A requirement for
the operation is that the energy supply
system complies with all current local
and national requirements that apply to
stand-alone, solar and/or battery
systems. The protective measures
provided in the domestic installation
and in this Miele product must also be
assured in their function and operation
in isolated operation or in non-mains
synchronous operation, or replaced
with equivalent measures in the
installation.