ABB AC500 Series Manual de instalação e configuração - Página 12
Procurar online ou descarregar pdf Manual de instalação e configuração para Equipamento industrial ABB AC500 Series. ABB AC500 Series 20 páginas. Scalable plc for individual automation, connection of a dcf77 radio clock to an ac500 via ascii protocol
Também para ABB AC500 Series: Exemplo de aplicação (8 páginas), Manual (18 páginas)
Imprimir página
Getting started with AC500 V3 products
Example project for central I/O expansion > Create, set-up and save your AC500 V3 project
5.
6.
1.4 Example project for central I/O expansion
The following steps show how to set-up an application project and configure the hardware. A
simple logic is used as example to introduce in programming and commissioning of the PLC.
The workflow for creation of a visualization is explained, as well as how to set-up a webserver
for visualization.
1.4.1 Preconditions
●
Automation Builder is installed and licensed as, at least, basic edition
neering software Automation Builder" on page 3.
●
AC500 V3 CPU is assembled and connected to the PC.
1.4.2 Create, set-up and save your AC500 V3 project
1.4.2.1
Create a project
1.
2.
12
Plug the appropriate electronic and I/O modules in the correct locations (processor
module, communication modules on terminal base, and eventually also communication
interface modules and I/O modules onto dedicated terminal units).
Connect a programming cable (Ethernet cable between ETH port of CPU and PC with
engineering software).
Launch Automation Builder either out of the desktop icon or out of the Windows menu.
Select "New Project" or go to menu "File è New Project".
3ADR010584, 2, en_US
Ä Chapter 1.2 "Engi-
2021/05/14