Chroma Inspire Manual de início rápido - Página 2

Procurar online ou descarregar pdf Manual de início rápido para Luminária Chroma Inspire. Chroma Inspire 3 páginas. Terminal strip
Também para Chroma Inspire: Manual do utilizador (20 páginas)

Imprimir página

Overview

The new Chroma-Q

Inspire™ Terminal Strip LED house light features a single light engine with 36 high powered LEDs

(RGBW), a fully homogenized optic and controlled via the Inspire™ External Control Box. Through the Inspire External

Control Box, the fixture can be controlled remotely through the ANSI E1.11 USITT DMX 512-A protocol.

Safety

1. This product is for professional use only. It is NOT intended for domestic or outdoor use.

2. The bright flash of light during power-up & continuous strobe may cause epileptic seizure.

Caution

3. This product must be used with a safety cable.

Cabling

System Diagram: (Figure 1)

Power & Data Connections: (Figure 2)

Inspire Terminal Strip Quick Start Guide V1.01

Power Input: (Figure 3)

To connect the wiring for power and control data:

Remove the cover plate for power input.

Maximum DMX cable

•

length from Data Out

Insert the AC power cable with strain relief through the cover plate and connect to the Terminal Block Plug and

•

1/2/3 to the 1st fixture

into the Terminal Block header in the fixture. (Figure 2 & 3)

must not exceed

500'/152m.

Put back and fasten the cover plate

•

Connect the DMX control data cables from the Inspire External Control Box to the Terminal Block Plug and plug

•

into the Terminal Block headers at the rear of the fixture (Figure 2 & 4)

Mounting

A mounting bracket is built into the enclosure for overhead applications. Secure the fixture with a safety bond. A fixing

hold is built into the enclosure.

Optics

The Inspire can be built with either Narrow, Medium or Wide lens. The beam angles are:

Narrow: ~32°; Medium: ~42°; Wide: ~65°

Control

The control functions are accessed through the Touch Screen display at the front panel of the Inspire External Control

Box. The features of the Touch Screen Display are:

Note: The DMX cable

connected to the first Terminal

Strip fixture from each Data

Output of the External Control

Box must be terminated with a

120 ohm resistor. See Inspire

Terminal Strip User Manual

for details.

Control Menu

Main Menu

Address

Inspire Terminal Strip Quick Start Guide V1.01

Control Data: (Figure 4)

Displays the model name, DMX information, AC and Emergency power input and Command buttons

Sets the DMX start address for each output: Output 1, Output 2, Output 3