Miller cineline 70 Manual do operador - Página 11

Procurar online ou descarregar pdf Manual do operador para Acessórios para câmaras Miller cineline 70. Miller cineline 70 17 páginas. Fluid head

4.4 Using a 3 mm Hex key unlock the LOCK SCREW (fig. 6),

then using a broad flat screw driver turn the ADJUSTING

SCREW (fig. 6) in the direction shown by 1/8 of a turn

and re-check step 4.2, repeat 4.4 if necessary. When

adjusted correctly, the SIDE LOAD LOCK LEVER will be

smooth to operate and require modest effort to lock the

CAMERA PLATE.

4.5 Once the correct adjustment is achieved, remove the

CAMERA PLATE and lock the LOCK SCREW.

Camera Plate

Turn Adjustment Screw

Counterclockwise to

compensate for a wider

camera plate.

Correct position of Side

Load Lock Lever at the

start of locking action.

Turn Adjustment Screw

Clockwise to compensate

for a narrower camera plate.

Fig. 9