Aquatic MP6 Manual do utilizador e de instalação - Página 15
Procurar online ou descarregar pdf Manual do utilizador e de instalação para Equipamento marítimo Aquatic MP6. Aquatic MP6 20 páginas. Basic din series stereo
Imprimir página
Settings Operation
7.2.2 Priority Display (Info/Clock)
When set it to PRI INFO the display will by default show information relating
to the music being played. Press and hold the MODE button to display the
clock for 5 seconds.
When set it to PRI CLK the display will by default show the clock. Pressing
any key it will display information relating to the music being played for 5
seconds.
7.2.3 Power On Volume
Sets the maximum volume the stereo will be set when powering the unit on. If
the stereo is switched off with a lower volume than the P-Vol setting then the
lower volume setting will be used.
Normal volume control and operation is resumed once the Rotary Selector is
turned after switching the stereo on.
7.2.4 Area US/Euro
Select US or European AM/FM radio frequencies.
US mode will increase and decrease the FM frequency in steps of 0.1 MHz, e.g. 88.5, 88.6,88.7
MHz. EUR mode will increase and decrease the FM frequency in steps of 0.05 MHz, e.g. 88.25,
88.30, 88.35 MHz.
7.2.5 Local On/Off
When Local is turned on the stereo seeks to only the radio channels with
strong signal strength. When Local is turned off the stereo will seek to all
radio channels it receives signal from.
When Local setting is turned on the word 'Local' will appear in the upper right hand corner of the
stereo's display.
7.2.6 Stereo/Mono
Change the output mode between stereo and mono. Some applications only
accept a mono input.
7.2.7 Clock Settings
Adjust the time and switch the clock on or off.
7.2.8 Bluetooth Off/Link
Switches Bluetooth connectivity on or off. All paired devices will be discon-
nected in Bluetooth Off mode.
7.2.9 Restore
Restores all factory settings.
15
MP600: MP6 Basic DIN Series Stereo
www.aquaticav.com