Aquatic MP6 Manual do utilizador e de instalação - Página 7
Procurar online ou descarregar pdf Manual do utilizador e de instalação para Equipamento marítimo Aquatic MP6. Aquatic MP6 20 páginas. Basic din series stereo
Imprimir página
Getting Started
MP600: MP6 Basic DIN Series Stereo
1.5.2 Installation cont.
3. Remove the front trim covers from the MP600 stereo to reveal the four (4)
front locking screws.
4. Slide the MP600 stereo into the mounting sleeve and through the mounting
hole and secure the stereo using the front locking screws and a screwdriver.
During final mounting, apply equal pressure to all points for the best water/
dust outer seal performance. Make sure screws are snug and do not over
tighten.
5. Review all outside surfaces of the MP600 stereo to ensure a proper
water/dust seal. This is important for long-term environmental protection
performance.
6. After installation is complete snap the trim covers back firmly in to place to
cover the screw holes.
7. After installation in complete snap the trim covers back firmly in to place to
cover the screw holes.
Mounting Hole
(183 x 53mm)
Dashboard
Mounting Sleeve
MP600
Locking
Trim Cover
Screws
!
Make sure to connect other wires before power connection.
www.aquaticav.com
7