Aquatic Access IGAT-180 AD Manual de instalação / Manual de instruções - Página 4

Procurar online ou descarregar pdf Manual de instalação / Manual de instruções para Sistemas de elevação Aquatic Access IGAT-180 AD. Aquatic Access IGAT-180 AD 16 páginas. Pool lift
Também para Aquatic Access IGAT-180 AD: Manual de instalação / Manual de instruções (18 páginas)

Imprimir página

POOL LIFT MODEL IGAT-180 ABOVE-DECK

The customer and installer are responsible for ensuring the strength of the mounting for the pool

lift and for determining if grounding the unit is necessary. Installation directions must be followed

to meet advertised lifting capacities.

SOCKET PLACEMENT

The socket location is mutually agreed upon

by the customer or installer and Aquatic

Access.

Usually, the customer provides Aquatic

Access with a drawing showing the

measurements and configuration of the

deck, coping, gutter, and pool wall. This

allows our engineers to determine the best

location for the socket. A distance of

42" – 48" from the deck to pool floor is ideal

for installation.

SOCKET INSTALLATION

Some states and localities require grounding of any metal object within five feet of the pool edge,

but this is sometimes difficult in retrofit versus new installations. Each socket has a grounding

lug on the bottom to connect to a grounding rod. Electrolysis (staining of the stainless steel) may

result if the lift is not properly grounded. Consult your local building codes for grounding

information.

INSTALLATION

The lift should normally be located at least 36" away from pool

corners and ladders that could interfere with the turn of the seat. The

socket should also not be placed directly on an expansion joint, but

at least 4" away from it. If unsure about the measurements,

configurations or structural integrity, have a local contractor verify

them.

If you have received the socket in advance of the lift without

instructions as to how far away from the pool edge to install the

socket, or if any questions remain, consult with the engineers at

Aquatic Access before installing the socket.