Olympus DP30BW Manual de instruções - Página 5

Procurar online ou descarregar pdf Manual de instruções para Câmara digital Olympus DP30BW. Olympus DP30BW 31 páginas. Microscope digital camera

Conformity of the System

Restrictions

1. The recommended C-mount camera adapter is the combination U-TV1X-2 + U-CMAD3 or the U-TV0.5XC-2. (The

U-TV0.5XC should not be used because it deteriorates the image flatness.)

A TV adapter with a magnification below 0.5X cannot be used because it obscures part of the image.

2. When combination SZX + SZX-RFA (RFL) + SZX-BS + SZX-PHA is used, the DP30BW can be used only when it is

mounted on the port on the opposite side to the lamp housing.

When combination SZX + SZX-RFA (RFL) + SZX-TR30 is used, the DP30BW can be used only when a large stand or

illumination stand is used.

3. When a double-port type intermediate attachment (U-DP, U-TRU, etc.) is used, only the port coming on the optical axis can

be used.

4. When the U-TV0.5XC-2 is used together with a low-power objective (1.25X or 2X), the peripheral part of image may be

obscured unless the U-ULC-2 ultralow-magnification condenser is used.

5. When the DP30BW is connected to the rear port of the U-DPT or U-MPH, the peripheral part of the image may be

deteriorated due to the optical performance of the U-DPT or U-MPH.

6. When the U-CFU is used, it is required to set the exposure to a longer period than 1/30 sec. using the manual exposure

mode and adjust the brightness by engaging or disengaging ND filters.

7. Intermediate attachments:

When the U-TV0.5XC-2 is used, using two or more intermediate attachments* may obscure the peripheral part of the field

of view.

* Two intermediate attachments: BX51 + U-URA + U-CA or equivalent.

8. A commercially available C-mount lens can be used provided that it is designed for a 2/3 in. or larger CCD and the lens

projection from the C-mount area is less than 4.5 mm. However, Olympus does not guarantee the performance in this

case.

If a lens that does not employ a telecentric optics is used, problems due to optical adaptability such as shading may

occur.

Operating Environment

Temperature: 10 to 35°C (50 to 95°F). Humidity: 20 to 85% (without condensation).

DP30BW