Axminster 109540 Manual de instruções original - Página 5

Procurar online ou descarregar pdf Manual de instruções original para Ferramenta eléctrica Axminster 109540. Axminster 109540 6 páginas. Drill press table

Imprimir página
3.3 ASSEMBLING THE STOP BLOCK
1. Place the M6x40 bolt (part 1) though the stop block (part 2) and washer (part 3). Loosely thread
the stop block knob (part 4) onto the bolt.
2. Slide the bolt through the T track on the fence (part 1) such that the bottom of the stop block (part
2) lies against the top of the table (part 3).
3. Slide the stop block to the desired position and lock it in place by fully tightening the knob.
3.4 ASSEMBLING THE HOLD DOWN CLAMPS
The drill press table comes with two hold down clamps, which can be used to clamp
down a workpiece to the drill press table.
1. Assemble the hold down clamps in the same order
as the clamp assemblies under the table.
2. Slide the bolts of the hold down clamps ( part1) into
the top T-slots on top of the table (part 2).
3. Place the workpiece on the drill press table and
clamp it down by tightening the knobs. Make sure the
clamp bushings are seated properly in the clamps.
4. DIAGRAM AND PART LIST
Part No.
Description
1
Fence
2
Bolt M8x70
3
Stop Block
4
Bolt M6x40
5
Triangle Knob
6
Washer 6x18x1.2
7
Clamp
8
Clamp Bushing
9
Bolt M8x90
10
Flower Knob
11
Washer 8x20x1.5
12
Table
13
Table Insert
4
Qty
1
2
1
1
1
1
5
5
5
7
7
1
1