Axor Uno 38623009 Instruções de utilização/Instruções de montagem - Página 2

Procurar online ou descarregar pdf Instruções de utilização/Instruções de montagem para Produto de canalização Axor Uno 38623009. Axor Uno 38623009 12 páginas.

Imprimir página
EN
0 2
S A F E T Y N O T E S
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
The hot and cold supplies must be of equal pressures.
I N S T A L L A T I O N I N S T R U C T I O N S
⁄ Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
⁄ The pipes and the fixture must be installed, flushed and
tested as per the applicable standards.
⁄ The plumbing codes applicable in the respective
countries must be observed.
T E C H N I C A L D A T A
Operating pressure:
Recommended operating pressure:
Test pressure:
Hot water temperature:
Recommended hot water temp.:
Centre distance:
Connections G 1/2:
Thermal disinfection:
⁄ The product is exclusively designed for drinking water!
⁄ Safety against backflow
A S S E M B L Y (see page 04)
max. 1 MPa
0,1 - 0,5 MPa
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
max. 70°C
65°C
150 ± 16 mm
cold right - hot left
max. 70°C / 4 min
S Y M B O L D E S C R I P T I O N
Do not use silicone containing acetic acid!
A D J U S T M E N T (see page 06)
To adjust the hot water limiter. Using a hot water
limiter in combination with a continuous flow
water heater is not recommended.
D I M E N S I O N S (see page 08)
F L O W D I A G R A M (see page 09)
 Shower outlet
 Tub outlet
S P A R E P A R T S (see page 10)
M A I N T E N A N C E (see page 05)
The check valves must be checked regularly according to
EN 806-5 in accordance with national or regional
regulations (at least once a year).
C L E A N I N G (see page 07)
O P E R A T I O N (see page 11)