ABB Contrac PME120AI Manual de instruções - Página 2
Procurar online ou descarregar pdf Manual de instruções para Controlador ABB Contrac PME120AI. ABB Contrac PME120AI 18 páginas. Electrical part-turn actuator
Também para ABB Contrac PME120AI: Manual de instruções (20 páginas)
Imprimir página
Content
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Proper use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety and precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Long-time storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Operating mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Actuator check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Mounting orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Mounting instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Mounting the Actuator to the Valve . . . . . . . . . . . . . . . . . . . . 6
Electrical Connection . . . . . . . . . . . . . . . . . . . . . . . . 8
Integrated electronic unit (standard) . . . . . . . . . . . . . . . . . . . 8
Integrated electronic unit (bus comunication) . . . . . . . . . . . . 8
Separate electronic unit EAN823 (standard) . . . . . . . . . . . . . 9
Signal input and output (conventional triggering) . . . . . . . . 10
Fuses at actuator with integrated electronic unit . . . . . . . . . 11
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Set-up via local control panel (LCP) . . . . . . . . . . . . . . . . . . 12
Adjustment using the configuration program . . . . . . . . . . . 13
Functions and signals at the LCP . . . . . . . . . . . . . . . . . . . . 13
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Motor and gears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adjusting the brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Replacing the position sensor . . . . . . . . . . . . . . . . . . . . . . . 14
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Electrical test values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Legend
Danger
Indicates an imminently hazardous situation
which, if not avoided, will result in death or
serious injury
Warning
Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury or serious property damage.
Caution
Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury or property damage.
Important
Indicates useful hints or other special infor-
mation which, if not observed, could lead to
a decline in operating convenience or affect
the functionality.
2
1.
Device Identification
1.1 Actuator ID label
1
Antrieb / Actuator: CONTRAC ....
2
F-Nr./No
3
M =
4
t =
5
min......max. .......
6
Öl / Oil:
7
Elektronik/Electronics
8
9
10
Made in Germany
1. Actuator type
2. Device number / No. of non-standard version (if applicable)
3. Rated torque / Year of manufacture
4. Permissible ambient temperature / protection class
5. Min./max. positioning travel / max. speed
6. Filled-in oil type
7. Associated electronics
8. Permissible voltage range / Mains frequency (only with PME120AI)
9. Power consumption / Fuse (only with PME120AI)
10.Available for customer-specific information
1.2 ID Label of electronic unit
The ID labels of the power electronic unit are located on
the cover of the local control panel.
1.2.1 ID Label for hardware description
1
Elektronik / Electronics Type: ....
2
B-Nr./No. ......
3
4
5
t = ..................°C
6
ABB Automation
Made in Germany
1. Electronic unit type
2. Device no. / No. of non-standard version (if applicable)
3. / Year of manufacture
4. Not used
5. Permissible ambient temperature / Protection class
6. Not used
1.2.2 ID Label for software description
1
Für / For
Antrieb / Actuator Typ / Type. . . . . . . .
2
Nennwerte / Rated values
M=....... .......°/s
3
F-Nr. / No.: . . . . . . . . . . . . . . . . . . . . . .
4
NL. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
SW Version . . . . . . . . . . . . . . . . . . . . .
1 Associated actuator type
2 Rated values for torque / force / speed
3 Fabrication No.
4 No. of non-standard version
5 Actuator firmware release
NL
Jahr/Year
CE
IP 66
max. .........
NL
Jahr/Year
IP 66
CE