Archers Sleepcentre Belgravia Instruções de montagem e cuidados - Página 3

Procurar online ou descarregar pdf Instruções de montagem e cuidados para Mobiliário de interior Archers Sleepcentre Belgravia. Archers Sleepcentre Belgravia 12 páginas. Boarded top gas lift frame

Imprimir página

Safety Advice

Please read these instructions carefully before you begin, when finished store safely for

future reference.

It would be sensible to lay down a sheet or blanket on the floor in the room you are

going to assemble the product in, this will help to avoid scratching the product and will

help to protect the floor.

IF THIS PRODUCT IS GOING TO BE USED ON A WOOD , LAMINATE OR

TILED FLOOR , YOU MUST APPLY "ANTI SLIP PADS" TO ALL LEGS

TOUCHING THE FLOOR.

THESE ARE AVAILABLE TO BUY IN MOST HARDWARE SHOPS IN A

FELT MATERIAL OR RUBBER AND ARE RELATIVELY INEXPENSIVE.

THE PADS WILL PROTECT YOUR FLOOR FROM ANY MARKING AND

ALSO FROM SLIPPING.

FAILURE TO APPLY THE PADS WILL RESULT IN NO RETURNS OF THE

PRODUCT AND ANY SPARE'S REQUESTED.

Unpack the product carefully, inspect all parts and check all the parts are in the box

remembering some parts are in the back of the headboard, check all hardware and

make sure all numbers match the AI.

We strongly recommend that children are kept out of the area where the bed is being

assembled as there are several small parts that could present a choking hazard.

Do not use any power tools in the assemble of this bed at ANY time.

When you start to assemble the product, we recommend you put all small parts i.e. nut,

bolts etc. into a bowel, this way you're less likely to lose any parts. Do not fully tighten

bolts till your product is fully assembled. Do not tighten the bolts fully until the bed has

been completely built.

Gas Lift Pistons

When you fit the piston, you MUST put the wide black end at the top and thin end

towards the floor, as per drawing on the instructions.

When you use for the first time the piston will feel stiff and hard to push down. Use

both handles to open and close a few times to soften up, never open without the

mattress on, as the pistons are set for a mattress to be used at all times.

Safety Warning

The storage space is not a child play area, for the safety of your child or children, please

ensure they do not try to open or close the gas lift.

The design and construction of the base is made to only work with a mattress on top,

do not sleep on the base without a mattress.

Every 3 months re-tighten the bolts to make sure they have not worked loose.

Make sure all 4 feet are in contact with the floor, if not use the adjustment on the feet

to make it happen.

If for any reason you want to move the product to a different location the bed MUST be

fully dismantled first to prevent damage.

P3 / 12