Ayra ComPar 20 Manual do utilizador - Página 6
Procurar online ou descarregar pdf Manual do utilizador para Equipamento de iluminação Ayra ComPar 20. Ayra ComPar 20 9 páginas. 3-in-1 rgb led spot
Imprimir página
To activate the unit, connect the included power supply to the unit and a suitable 230V, 50 Hz power outlet.
The fixture will start up and show the last chosen setting on the display. Usually, with a new product, this is
the DMX mode with the value set on 001.
The display shows several settings, each with the possibility to set several values.
Use the display and the menu buttons to set preferences, change settings and scroll through the menu.
"Enter" is used to save a certain setting or preset, press "Menu" for at least 2 seconds to discard the change
and return to the main menu.
The table below shows an explanation for every feature and value.
display
Mode
ADDR
DMX address setting
CHND
Channel mode
SLND
Master/slave mode
SHNd
Color
Jump
Fade
SOUN
Sound controlled mode
SENE
Sound sensitivity
BALA
White Balance
LED
LED display on/off during use
DISP
Display inversion
TEST
Test mode, color test
TEMP
Temperature in degrees Celsius
HOUR
Total working time in hours
ADDR: DMX address setting, used to determine the DMX starting channel. From this channel on, the fixture
will respond to values, corresponding with the amount of channels that the fixture is occupying. (For
example, when you turn the fixture in 3CH mode and set the starting address to value 003, the fixture will
respond to channels 3, 4 and 5.)
CHND: The channel mode of the fixture makes it possible to use the correct channel mode setting for every
application. For simple and basic setups, users may prefer to use the basic mode. For advanced setup,
users may prefer to control more functions with the advanced modes.
SLND: When using the master/slave function, you need to connect 2 or more fixtures with XLR-XLR cable.
The first fixture in line needs to be set as master, the others as Slave 1 or 2 (synchronized or mirrored
performance). This way, the slaves will mimic the behavior of the master fixture for wonderful synchronized
lighting shows.
SHND: Show programs, which are used to turn the fixture in a stand-alone LED projector, which changes
colors automatically by switching, fading or performing static with a certain color and intensity.
Color: Select a color, apply dimmer and strobe options. After this, the fixture will project the static color.
Setting up the unit
Function
A001-A512
2CH/3CH1/3CH2/6CH
Master (default)
Slave
Color 1~7
Dimmer 0~255
Strobe 0~255
Speed 0~99
Dimmer 0~255
Strobe 0~255
Speed 0~99
Dimmer 0~255
Strobe 0~255
Sound controlled mode on/off
Sound sensitivity 0-100
Red
050~255
Green 050~255
Blue
050~255
YES-NO
Display Inversion [dIsp] / [dsIp]
TEST
0 – 9999
0 – 9999