Ayra TDC 444 MKII Manual do utilizador - Página 6
Procurar online ou descarregar pdf Manual do utilizador para Equipamento de iluminação Ayra TDC 444 MKII. Ayra TDC 444 MKII 9 páginas. Dmx led light effect with 4 scan mirrors
Também para Ayra TDC 444 MKII: Manual do utilizador (11 páginas)
Imprimir página
To activate the unit, connect the included power supply to the unit and a suitable 230V, 50 Hz power outlet.
The fixture will start up and show the last chosen setting on the display. Usually, with a new product, this is
the DMX mode with the value set on 001.
The display shows several settings, each with the possibility to set several values.
Use the display and the menu buttons to set preferences, change settings and scroll through the menu.
"Enter" is used to save a certain setting or preset, press "Menu" for at least 2 seconds to discard the change
and return to the main menu.
The table below shows an explanation for every feature and value.
display
Mode
ADDR
DMX address setting
CHND
Channel mode
SLND
Master/slave mode
SHND
Auto mode
SOUN
Sound controlled mode
Led
LED mode
DISP
Display inversion
TEST
Test mode
Hour
Using time of light
ADDR: DMX address setting, used to determine the DMX starting channel. From this channel on, the fixture
will respond to values, corresponding with the amount of channels that the fixture is occupying. (For
example, when set the starting address to value 003, the fixture will respond to channels 3, 4, 5 etc..)
CHND: The channel mode of the fixture makes it possible to use the correct channel mode setting for every
application. For simple and basic setups, users may prefer to use the 9CH mode. For advanced setup, users
may prefer to control each pixel in detail, by using the 12-channel mode.
SLND: When using the master/slave function, you need to connect 2 or more fixtures with XLR-XLR cable.
The first fixture in line needs to be set as master, the others as Slave 1 or 2 (synchronized or mirrored
performance). This way, the slaves will mimic the behavior of the master fixture for wonderful synchronized
lighting shows.
SHND: Auto mode. Select one of the built-in programs (0-16) and select the correct speed (1-9)
SOUN: Activate or disable the built-in sound controlled mode. This way, the fixture will respond to the beat of
the music.
SOU1 is setting 1, which makes the fixture continue its light show when no music is detected, with slow
movement and slow color changes.
SOU2 is setting 2, which makes the fixture 'freeze' when no music is detected.
Led: The LED display will shut off automatically after a few seconds when this function is activated. When
pressing any button, the display will activate again. When deactivating the feature, the display will be lit
permanently.
DISP: Display invert version – When using the fixture in a hanging setup, it is possible to flip the display, so
the characters will be shown upside down. This makes reading the several statuses much easier.
TEST: Self test mode, to control all segments and LEDs
Setting up the unit
Function
A001-A512
9CH/12CH
Master (default)
Slave 1 - Slave 2
Show 0-16 – Speed 1-9
Sound controlled mode on/off
SOU1: Keep running slow without sound
SOU2: Stop moving without sound
ON-OFF
Display Inversion, Idsp-dspI
Self test
Fixture hours,0 ~ 9999