Accuris SmartDoc 2.0 Manual de instruções - Página 3

Procurar online ou descarregar pdf Manual de instruções para Equipamento de laboratório Accuris SmartDoc 2.0. Accuris SmartDoc 2.0 8 páginas. Imaging enclosure
Também para Accuris SmartDoc 2.0: Manual de instruções (8 páginas), Filtro e manual do utilizador (1 páginas)

1. INTRODUCTION

Congratulations on your purchase of a SmartDoc 2.0 Imaging Enclosure. This
enclosure is designed for capturing high quality photos of electrophoresis gels
with a smart phone or tablet camera. The SmartDoc Enclosure can be used on
existing blue light or UV transilluminators.
An orange photo filter is included with the system. This filter is designed to
absorb (block) blue excitation light from a blue light transilluminator, allowing
through only the fluorescing sample light for capturing gel images using a smart
phone camera.
Additional filters are required and available separately for imaging gels on a
UV transilluminator.
To ensure proper operation and performance from your SmartDoc System,
please read this manual in its entirety before use.

2. WARNINGS

Read this manual in its entirety before operating the SmartDoc system, and keep
the manual for future reference.
CAUTION: When using blue light transilluminators: Although blue
light does not pose the same hazards as UV light, the emitted blue
light is very bright. It is not recommended to look directly at the blue
light illumination surface .
CAUTION: When working in a laboratory environment, it is always
important to properly handle all reagents and chemicals. When using
a cell phone for capturing gel images, it is very important not to
contaminate the phone with any chemicals or reagents. Use proper and common
laboratory safety practices when working with reagents and gels stained with
DNA dye. Always wear gloves, and always change gloves when switching from
handling gels, or reagent to use of a cell phone, and vice versa. The SmartDoc
System components should be cleaned periodically using mild soap and water or
10% bleach solution for decontamination.
CAUTION: If using the SmartDoc enclosure on a UV transilluminator,
always use caution to prevent exposure of the skin and eyes to UV
light. If working on a UV transilluminator with a viewing surface larger
than the bottom of the SmartDoc housing, use the E5000-MAT UV Blocking Mat
to block UV light from emitting around the edges of the SmartDoc.
3