Sharp AR-C260M Manual de operação da impressora - Página 20

Procurar online ou descarregar pdf Manual de operação da impressora para Impressora tudo em um Sharp AR-C260M. Sharp AR-C260M 50 páginas. Color adjustment
Também para Sharp AR-C260M: Operações do scanner de rede (42 páginas), Manual de instruções da chave (19 páginas), Manual de instalação do software (25 páginas), Manual de gestão de cores (8 páginas), Manual de instalação (15 páginas), Manual do utilizador (8 páginas)

SELECTING PRINTING FUNCTIONS

Advanced settings

The following screen appears when the Advanced Settings tab is selected. The settings and buttons in this screen

are explained below.

Image Quality

This item is used to select the [Resolution

Settings] and [Graphics Mode] for printing.

[Resolution Settings]

Select 300 dpi or 600 dpi.

Default setting: 600 dpi

[Graphics Mode]

Select [Raster] or [HP-GL/2]. Select [Raster] to

print using raster graphics. Select [HP-GL/2] to

print using HP-GL/2 commands.

Default setting: HP-GL/2

Margin Shift

Use this setting to shift the document image to

move the margin at the left, right, or top of the

paper. Select from [None], [10mm.], [20mm.], or

[30mm.].

Default setting: None

Page Protection

If an error occurs because there is too much print

data, selecting this checkbox may enable printing

to take place. Try selecting this checkbox when a

print error occurs. (If only standard memory is

installed (128 MB), this setting cannot be

selected.)

Default setting: Not selected

TABLE OF CONTENTS

Overlays

Select this setting to print the document as an

overlay on a previously created form. The form

must have been previously stored.

Default setting: No Overlay

[Edit]

Click this button to open the overlay settings

screen. The form selected in this screen will be

used for the overlay.

Font

Click this button to change the font settings.

BEGINNING OF CHAPTER

2-8