Accutone Alpha 1100 series Manual de instalação e manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual de instalação e manual do utilizador para Amplificador Accutone Alpha 1100 series. Accutone Alpha 1100 series 10 páginas. Apollo series telephony & multimedia amplifier

Imprimir página

connection & preparation.

Hooking all the parts together!

To the computer headset:

This applies only to computer headset with separate microphone and speaker

plugs. Insert the Speaker Plug of the headset to the Jack on the Front Panel

with the "Speaker" sign (9) and the Microphone Plug to the Jack with the

"Microphone" sign (10).

Replacing Batteries:

Slightly depress the compartment lid and slide it outwards. Install batteries

with polarities according to the battery diagram inside the compartment.

Close the lid and turn the power "ON". T wo UM-3 (AA) batteries are

required. Alkaline batteries are recommended.

OPEN

I.2.4 Configure the Control Unit

The 6-position Configuration Switch (2) at the back panel allows you to

select the proper setting so that the unit will work with your telephone base

unit. The control has 6 positions, which are (1 - 2 - 3 - 4 - 5 - 6). Wear the

headset over your head and switch the Handset/Headset Switch (11) to the

Headset position. Make sure to turn down the volume adjustment to protect

your ear. Check to see if the Telephone/Computer Switch (8) is set to

telephone position, if not, make sure it is. Now switch the 6-position

Configuration switch slowly until you can hear a clear dial tone.

If you receive a clear dial tone sound, then the receiving connection is

working. Note that there may be 2 matching setting, choose the clearer setting

or either one if both perform the same. There is at least one setting which

matches your telephone.

part 1. getting comfortable.

connection & preparation.

Hooking all the parts together!

. . . . . .

1 2 3 4 5 6