Siemens SN23E831TI Manual de Instruções - Página 12

Procurar online ou descarregar pdf Manual de Instruções para Máquina de lavar loiça Siemens SN23E831TI. Siemens SN23E831TI 40 páginas.

Imprimir página

Rinse aid

R in s e a i d

As soon as the rinse-aid refill

indicator X is lit on the fascia, there

is still a rinse-aid reserve of 1-2 rinsing

processes. Refill with rinse aid.

The rinse aid is required for stain-free

utensils and clear glasses. Use only

rinse aid for domestic dishwashers.

Combined detergents with rinse-aid

component may be used up to a water

hardness of 21° dH (37° fH,

26° Clarke, 3.7 mmol/l) only. If

the water hardness is over 21° dH,

rinse aid must be used.

1. Open the dispenser 1j by pressing

and lifting the plate on the cover.

2. Carefully pour rinse aid up

to the max. mark in the filler opening.

3. Close cover until it clicks shut.

4. To prevent excessive foam formation

during the next rinse cycle, remove

any rinse aid which has run over with

a cloth.

Setting amount of rinse aid

The amount of rinse aid dispensed can

be set in 4 stages. Accordingly 0, 1, 2

or 3 displays are lit (see water hardness

table).

Factory setting: 2.

Do not change the amount of rinse aid

unless streaks (select lower

setting) or water stains (select higher

setting) are left on the utensils.

1. Close the door.

2. Switch on ON/OFF switch (.

The Cleaning display )* flashes.

3. Press and hold down the START

button @.

4. Rotate programme selector 8 until

the rinse aid refill indicator X

flashes.

5. Release button.

The rinse aid refill indicator X

flashes and the displays )"

and h are lit (= Setting 2).

To change the setting:

1. Rotate programme selector 8 until

the required setting has been

selected.

2. Press START button @.

The rinse-aid refill indicator X goes

out. The selected setting is saved.